E_T-W2 & F_T-W2 Series
0.25W, FIXED INPUT, ISOLATED & UNREGULATED
DUAL/SINGLE OUTPUT DC-DC CONVERTER
UTRALMINIATURE SMD PACKAGE
Multi-country patent protection RoHS
PRODUCT PROGRAM
FEATURES
Input
Output
Single Voltage Output
SMD Package Style
Industry Standard Pinout
No Heat sink Required
3KVDC Isolation
Part
Number
Efficiency
(%, Typ.)
Voltage (VDC)
Current (mA)
Voltage
(VDC)
Nominal
Range
Max
Min
8
F0303T-W2
F0305T-W2
F0505T-W2
F0509T-W2
F0512T-W2
F0515T-W2
E0505T-W2
E0509T-W2
E0512T-W2
E0515T-W2
F1205T-W2
F1209T-W2
F1212T-W2
F1215T-W2
E1205T-W2
E1209T-W2
E1212T-W2
E1215T-W2
3.3
5
75
50
60
60
64
65
67
66
64
65
67
66
65
64
63
64
65
64
63
64
3.3
3.0-3.6
5
High Power Density
5
50
5
Internal SMD construction
Temperature Range: -40°C~+85°C
No External Component Required
RoHS Compliance
9
28
3
12
15
±5
±9
±12
±15
5
21
2
17
2
5
4.5-5.5
±25
±14
±10.5
±8.5
50
±3
±2
±1
±1
5
APPLICATIONS
The E_T-W2&F_T-W2 Series are specially
designed for applications where a group of
polar power supplies are isolated from the input
power supply in a distributed power supply
system on a circuit board.
9
28
3
12
15
±5
±9
±12
±15
21
2
17
2
These products apply to:
12
10.8-13.2
±25
±14
±10.5
±8.5
±3
±2
±1
±1
1) Where the voltage of the input power supply
is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤3000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are not
demanding.
OUTPUT SPECIFICATIONS
Item
Test Conditions
Min
Typ.
Max
Units
W
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
Output power
0.25
±1.5
±1.2
20
For Vin change of 1%(3.3V output)
Line regulation
Load regulation
For Vin change of 1%(Others output)
3.3V output
15
12.8
8.3
6.8
6.3
%
5V output
15
MODEL SELECTION
10% to 100%
9V output
load
10
Rated Power
Package Style
Output Voltage
Input Voltage
12V output
10
15V output
10
Output voltage accuracy
Temperature drift
See tolerance envelope graph
Product Series
100% full load
0.03
75
%/°C
mVp-p
KHz
Output ripple &Noise*
Switching frequency
20MHz Bandwidth
50
Full load, nominal input
100
MORNSUN Science& Technology co.,Ltd.
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless
otherwise specified.
2. See below recommended circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
F_T-W2&E_T-W2
A/0-2007
Page 1 of 2