DSA2311KA2-R0009VAO
Crystal-less™ Configurable Clock Generator
for Automotive
General Description
Features
DSA2311KA2-R0009VAO is a crystal-less clock
generator that is factory configurable to
simultaneously output two separate frequencies
from 2.3 to 170MHz.
• AEC-Q100 automotive qualified
• Two simultaneous LVCMOS outputs:
- 25MHz
• Low RMS phase jitter: <1ps (typical)
The clock generator uses proven silicon MEMS
technology to provide low jitter and high frequency
stability across a wide range of supply voltages and
temperatures. By eliminating the external quartz
crystal, crystal-less clock generators significantly
• ±25ppm frequency stability
• -40°C to +125°C (Grade 1) temperature range
• High supply noise rejection: -50dBc
• High shock & vibration immunity
- Qualified to MIL-STD-883
• High reliability
- 20x higher MTBF than crystal-based clock
generator designs
enhance reliability
and
accelerate
product
development, while meeting stringent clock
performance criteria for a variety of consumer
electronics, communications, and storage applications.
DSA2311KA2-R0009VAO has
an
output
• Supply range of 2.25 to 3.6V
• 6-pin 2.5mm x 2.0mm TDFN package
enable/disable feature allowing it to disable the
outputs when OE is low. The device is available in a
space-saving 6-pin 2.5mm x 2.0mm TDFN package
that needs only a single external bypass capacitor.
Applications
• Automotive Infotainment
• Automotive ADAS
• Automotive Camera Module
• Automotive LIDAR and RADAR
Block Diagram
Control Circuitry
CLK0
÷ M1
25MHz LVCMOS
MEMS
PLL
CLK1
÷ M2
25MHz LVCMOS
OE
ClockWorks is a registered trademark of Microchip Technology Inc.
Microchip Technology Inc.
http://www.microchip.com
March 23, 2018
6493
Revision 1.0
tcg_help@microchip.com