19-5934; Rev 1; 10/11
DS4830
Optical Microcontroller
General Description
Features
The DS4830 provides a complete optical control, cali-
bration, and monitor solution with a low-power, 16-bit,
MAXQ20 microcontroller core providing generous pro-
gram and RAM data memory. I/O resources include
a fast/accurate analog-to-digital converter (ADC), fast
comparators with an internal comparison digital-to-ana-
log converter (DAC), 12-bit DACs, 12-bit PWMs, internal
Sꢀ16-BitꢀMAXQ20ꢀLow-PowerꢀMicrocontroller
SꢀEfficientꢀC-LanguageꢀProgramming
Sꢀ36KWordsꢀTotalꢀProgramꢀMemory
ꢀ32KWordsꢀFlashꢀProgramꢀMemory
ꢀ4KWordsꢀROMꢀProgramꢀMemory
Sꢀ1KWordꢀDataꢀRAM
2
and external temperature sensors, fast sample/hold, I C
Sꢀ8ꢀDACꢀChannels
slave host interface, and a multiprotocol serial master/
slave interface. Direct connection of diode-connected
transistors, used as remote temperature sensors, is
supported as well as expansion to a virtually unlimited
number of external digital temperature sensor ICs using
ꢀ12-BitꢀVoltageꢀDACs
ꢀInternalꢀorꢀExternalꢀReference
Sꢀ10ꢀPWMꢀChannels
ꢀBoost/BuckꢀDC-DCꢀControlꢀwithꢀSupportꢀfor
ꢀ
ꢀ
7-Bitꢀtoꢀ12-BitꢀResolutionꢀandꢀ1MHzꢀSwitchingꢀ
Frequencyꢀ
2
the on-chip master I C interface. An independent slave
2
I C interface facilitates communication to a host micro-
ꢀSupportsꢀ4-ChannelꢀTECCꢀH-BridgeꢀControl
processor in addition to password-protected in-system
reprogramming of the on-chip flash.
Sꢀ10-BitꢀFastꢀComparatorꢀwithꢀ16-InputꢀMux
ꢀ1.6µsꢀperꢀComparison
Ease of development is supported with highly versatile
C-compilers and development software that programs
flash and performs in-circuit debug through the integrat-
ed JTAG interface and associated hardware.
Sꢀ13-BitꢀA/DꢀConverterꢀwithꢀ18-InputꢀMuxꢀ(27ksps)
SꢀTemperatureꢀMeasurementꢀAnalogꢀFront-End
ꢀInternalꢀTemperatureꢀSensor,ꢀ 3NC
ꢀ0.125NCꢀResolution
Applications
ꢀSupportsꢀTwoꢀExternalꢀTemperatureꢀSensors
ꢀDifferentialꢀRail-RailꢀInputs
PON Diplexers and Triplexers: GPON, 10GEPON,
XPON OLT, ONU
Sꢀ31ꢀGPIOꢀPins
SꢀMaskableꢀInterruptꢀSources
Optical Transceivers: XFP, SFP, SFP+, QSFP,
40G, 100G
SꢀInternalꢀ20MHzꢀOscillator,ꢀCPUꢀCoreꢀFrequencyꢀ10MHz
ꢀ4%ꢀAccurateꢀfromꢀ0NCꢀtoꢀ+50NC
SꢀUpꢀtoꢀ133MHzꢀExternalꢀClockꢀforꢀPWMꢀandꢀTimers
SꢀSlaveꢀCommunicationꢀInterface:ꢀSPI™ꢀorꢀ400kHzꢀ
Ordering Information appears at end of data sheet.
2
I C-Compatibleꢀ2-Wire
2
SꢀMasterꢀCommunicationꢀInterface:ꢀSPI,ꢀ400kHzꢀI C-
Compatible,ꢀorꢀMaximꢀ3-WireꢀLaserꢀDriver
2
Typical Application Circuit appears at end of data sheet.
SꢀI CꢀandꢀJTAGꢀBootloader
SꢀTwoꢀ16-BitꢀTimers
Sꢀ3.0Vꢀtoꢀ3.6VꢀOperatingꢀVoltageꢀRange
SꢀBrownoutꢀMonitors
SꢀJTAGꢀPortꢀwithꢀIn-SystemꢀDebugꢀandꢀProgramming
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
SPI is a trademark of Motorola, Inc.
SꢀLowꢀPowerꢀConsumptionꢀ(16mA)ꢀwithꢀAllꢀAnalogꢀ
Active
For related parts and recommended products to use with this part, refer to: www.maxim-ic.com/DS4830.related
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may
be simultaneously available through various sales channels. For information about device errata, go to: www.maxim-ic.com/errata.
ꢀ����������������������������������������������������������������� ꢀMaxim Integrated Productsꢀ ꢀ 1
Forꢀpricing,ꢀdelivery,ꢀandꢀorderingꢀinformation,ꢀpleaseꢀcontactꢀMaximꢀDirectꢀatꢀ1-888-629-4642,ꢀ
orꢀvisitꢀMaxim’sꢀwebsiteꢀatꢀwww.maxim-ic.com.