DS3680
QUAD TELEPHONE RELAY DRIVER
SLRS014C – MARCH 1986 – REVISED SEPTEMBER 1995
D OR N PACKAGE
(TOP VIEW)
• Designed for –52-V Battery Operation
• 50-mA Output Current Capability
• Input Compatible With TTL and CMOS
• High Common-Mode Input Voltage Range
• Very Low Input Current
• Fail-Safe Disconnect Feature
• Built-in Output Clamp Diode
1 IN+
1 IN–
2 IN–
2 IN+
3 IN+
3 IN–
4 IN–
BAT GND
1 OUT
1
2
3
4
5
6
7
14
13
12
11
10
9
2 OUT
3 OUT
4 OUT
BAT NEG
4 IN+
• Direct Replacement for National DS3680
8
and Fairchild µA3680
description
symbol (each driver)
The DS3680 telephone relay driver is a monolithic
integrated circuit designed to interface –48-V
relay systems to TTL or other systems in
telephone applications. It is capable of sourcing
up to 50 mA from standard –52-V battery power.
ToreducetheeffectsofnoiseandIRdropbetween
logic ground and battery ground, these drivers are
designed to operate with a common-mode input
range of ±20 V referenced to battery ground. The
common-mode input voltages for the four drivers
can be different, so a wide range of input elements
can be accommodated. The high-impedance
inputs are compatible with positive TTL and
CMOS levels or negative logic levels. A clamp
network is included in the driver outputs to limit
high-voltage transients generated by the relay coil
during switching. The complementary inputs
ensure that the driver output is off as a fail-safe
condition when either output is open.
BAT GND
IN +
IN –
+
–
OUT
BAT NEG
schematic diagram (each driver)
15 kΩ
BAT GND
IN +
IN –
The DS3680 is characterized for operation from
0°C to 70°C.
OUT
BAT NEG
All resistor values shown are nominal.
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265