19-4932; Rev 4; 1/12
DS2482-800
8-Channel 1-Wire Master
GENERAL DESCRIPTION
FEATURES
.
.
.
.
.
I2C Host Interface, Supports 100kHz and 400kHz
I2C Communication Speeds
The DS2482-800 is an I2C-to-1-Wire bridge device
that interfaces directly to standard (100kHz max) or
fast (400kHz max) I2C masters to perform
bidirectional protocol conversion between the I2C
master and any downstream 1-Wire slave devices.
Relative to any attached 1-Wire slave device, the
DS2482-800 is a 1-Wire master. Internal factory-
trimmed timers relieve the system host processor
from generating time-critical 1-Wire waveforms,
supporting both standard and Overdrive 1-Wire
communication speeds. To optimize 1-Wire
waveform generation, the DS2482-800 performs
slew-rate control on rising and falling 1-Wire edges
and has a programmable feature to mask the fast
presence pulse edge that some 1-Wire slave devices
can generate. Programmable strong pullup features
support 1-Wire power delivery to 1-Wire devices such
as EEPROMs and sensors. The DS2482-800
combines these features with eight independent
1-Wire I/O channels. The I2C slave address
assignment is controlled by three binary address
inputs, resolving potential conflicts with other I2C
slave devices in the system.
1-Wire Master I/O with Selectable Active or
Passive 1-Wire Pullup
Provides Reset/Presence, 8-Bit, Single-Bit, and
Three-Bit 1-Wire I/O Sequences
8 Channels of Independently Operated
1-Wire I/O
Standard and Overdrive 1-Wire Communication
Speeds
.
.
Slew Controlled 1-Wire Edges
Supports Low-Impedance 1-Wire Strong Pullup
for EEPROMs, Temp Sensors, or Other 1-Wire
Slaves That Have Momentary High Current
Modes
.
.
.
Three Address Inputs for I2C Address
Assignment
Wide Operating Range: 2.9V to 5.5V, -40°C to
+85°C
16-Pin SO Package (150 mils)
ORDERING INFORMATION
TEMP
PIN-
PART
RANGE
PACKAGE
DS2482S-800+
DS2482S-800+T&R
+Denotes a lead(Pb)-free/RoHS-compliant package.
T&R = Tape and reel.
16 SO
16 SO
-40 to +85C
-40 to +85C
APPLICATIONS
Wireless Base Stations
Central Office Switches
PBXs
Rack-Based Servers
Medical Clinical Diagnostic Equipment
PIN CONFIGURATION
IO3
SCL
SDA
VCC
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
IO2
IO1
IO0
GND
IO4
IO5
IO6
IO7
TYPICAL OPERATING CIRCUIT
NC
AD2
AD1
AD0
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
1 of 23