19-4932; 11/09
DS2482-800
Eight-Channel 1-Wire Master
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
The DS2482-800 is an I²C to 1-Wire bridge device
that interfaces directly to standard (100kHz max) or
fast (400kHz max) I²C masters to perform bi-
directional protocol conversion between the I²C
master and any downstream 1-Wire slave devices.
Relative to any attached 1-Wire slave device, the
DS2482-800 is a 1-Wire master. Internal factory-
trimmed timers relieve the system host processor
from generating time-critical 1-Wire waveforms,
supporting both standard and Overdrive 1-Wire
communication speeds. To optimize 1-Wire
waveform generation, the DS2482-800 performs
slew-rate control on rising and falling 1-Wire edges
and has a programmable feature to mask the fast
presence pulse edge that some 1-Wire slave devices
can generate. Programmable strong pullup features
support 1-Wire power delivery to 1-Wire devices such
as EEPROMs and sensors. The DS2482-800
combines these features with eight independent 1-
Wire I/O channels. The I²C slave address assignment
is controlled by three binary address inputs, resolving
potential conflicts with other I²C slave devices in the
system.
.
.
.
.
.
I²C Host Interface, Supports 100kHz and 400kHz
I²C Communication Speeds
1-Wire Master I/O with Selectable Active or
Passive 1-Wire Pullup
Provides Reset/Presence, 8-Bit, Single-Bit, and
Three-Bit 1-Wire I/O Sequences
Eight Channels of Independently Operated
1-Wire I/O
Standard and Overdrive 1-Wire Communication
Speeds
.
.
Slew Controlled 1-Wire Edges
Supports Low-Impedance 1-Wire Strong Pullup
for EEPROMs, Temp Sensors, or Other 1-Wire
Slaves That Have Momentary High Current
Modes
.
.
.
Three Address Inputs for I²C Address
Assignment
Wide Operating Range: 2.9V to 5.5V, -40°C to
+85°C
16-Pin SO Package (150 mil)
ORDERING INFORMATION
PART
TEMP RANGE
-40 to +85C
-40 to +85C
PIN-PACKAGE
16 SO (150 mil )
16 SO (150 mil )
DS2482S-800+
DS2482S-800+T&R
+Denotes a lead(Pb)-free/RoHS-compliant package.
T&R = Tape and reel.
APPLICATIONS
.
.
.
.
.
Wireless Base Stations
Central Office Switches
PBXs
Rack-Based Servers
Medical Clinical Diagnostic Equipment
PIN CONFIGURATION
IO3
SCL
SDA
VCC
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
IO2
IO1
IO0
GND
IO4
IO5
IO6
IO7
TYPICAL OPERATING CIRCUIT
NC
AD2
AD1
AD0
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
1 of 23