Document 186-1
SMT Power Inductors - DS1608 Series
These shielded, ultraminiature inductors can help achieve
significantly longer battery life in handheld communication
devices and other portable products.
Theyofferthehighestefficiency, smallestsizeandlowest
cost of any comparable part. DCR is 10 to 60% lower
than other inductors, with greatest improvements seen
at values from 100 to 10,000 µH. Their flat top and heat
resistantmaterialsensuretrouble-freeassemblyandreflow
operations.
CoilcraftDesigner’sKitC115containssamplesofeachof
thestandardpartsshown.Toorder,contactCoilcraftorvisit
http://order.coilcraft.com.
DCR
max
SRF
typ
Part
L ±±202
(µH)
Isat3
number1
Q min
(Ohms) (MHz) (A)
0.115
2,92
max
DS1608C-102
DS1608C-152
DS1608C-222
DS1608C-332
DS1608C-472
DS1608C-682
DS1608C-103
DS1608C-153
DS1608C-223
DS1608C-333
1.0 30 @ 200kHz
1.5 30 @ 200kHz
2.2 40 @ 200kHz
3.3 40 @ 200kHz
4.7 40 @ 200kHz
0.040 250
0.045 125
0.050 120
0.055 120
0.060 105
1.4
0.93
0.92
0.75
0.58
0.260
6,60
Recommended
Land Pattern
max
0.055
1,40
0.160
4,06
0.050
1,27
6.8 40 @ 200kHz
0.065
0.075
0.090
0.11
50
38
33
25
20
0.58
0.37
0.31
0.30
0.30
10
40 @ 200kHz
40 @100kHz
40 @100kHz
40 @100kHz
15
22
33
0.140
3,56
0.175
4,45
0.090
2,29
max
0.19
DS1608C-473
DS1608C-683
DS1608C-104
DS1608C-154
DS1608C-224
DS1608C-334
DS1608C-474
DS1608C-684
DS1608C-105
DS1608C-155
47
68
100
150
220
330
470
680
40 @100kHz
40 @100kHz
40 @100kHz
40 @100kHz
40 @100kHz
40 @100kHz
40 @100kHz
40 @100kHz
40 @100kHz
50 @100kHz
0.23
0.29
0.48
0.59
0.77
1.4
1.8
2.2
3.4
4.2
20
15
10
9
0.24
0.17
0.13
0.10
0.10
0.07
0.06
0.055
0.045
0.035
0.270
6,86
0.040
1,02
0.170
4,32
min
6
1st
significant
digit
5
4
3
2
2
Part Markings
Dash
number
2nd
1000
1500
significant
digit
DS1608C-225
DS1608C-335
DS1608C-475
DS1608C-685
2200
3300
4700
6800
50 @100kHz
8.5
2
1
1
1
0.028
0.024
0.021
0.019
50 @100kHz 11.0
50 @100kHz 13.9
50 @100kHz 25.0
50 @100kHz 32.8
Multiplier
Weight:
Terminations:
144 –167mg
Nickel/goldovermoly-manganese
DS1608C-106 10000
0.8 0.017
1. Part number on reel label will have a suffix to indicate packaging:
Tapeandreel: 750/7″ reel; 2500/13″ reel 12 mm tape width
For packaging data see Tape and Reel Specifications section.
C = machine ready 7″ reel, B = partial reel, D = machine-ready 13″ reel.
2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc.
3. DC current at which the inductance drops 30% (typ.) from its value
without current.
4. Operating temperature -40°C to +85°C.
5. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
See Color Coding section for part marking data.
Specifications subject to change without notice.
Please check our website for latest information. Document 186-1 Revised 12/22/04