TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24V 60W 1 Phase / NEC Class 2 / DRP024V060W1N□
Highlights & Features
–
–
–
–
–
–
–
–
–
–
–
Reliable design, with expected life of 10 years
Compact, rugged design for ease of handling and installation
Multiple connections to terminals allowed
With Conformal Coating on PCBA (DRP024V060W1NZ)
Class I, Div 2 Hazardous Locations (DRP024V060W1NY)
IP20 Compliant
NEC Class 2 Compliant
Meets worldwide safety requirements
RoHS Directive 2011/65/EU Compliant
Worldwide AC input range without power de-rating
Overvoltage / Overcurrent / Over Temperature Protections
Safety Standards
CB Certified for worldwide use
Model Number:
DRP024V060W1N□
Unit Weight:
0.33 kg
Dimensions (L x W x D): 120.6 x 32 x 119.3 mm
General Description
The CliQ II 24V 60W NEC Class 2 certified power supply is the latest offering from one of the world’s largest power supply manufacturers
and solution providers - Delta. The product can be used in general industrial applications, especially for dry indoor condition with the
advantage of lower wiring costs for a system due to its compliance with NEC Class 2 requirements. The NEC (National Electrical Code) is
a North American standard, which is regarded as a law in most North American states. The NEC describes the installation of electric
conductors and equipments within or on buildings. The DRP024V060W1NZ features universal AC input and a high efficiency of more
than 87%. The product has an expected life time of 10 years and will have no output power de-rating for the entire range of input voltage
from 85Vac to 264Vac. This is useful for systems that require full output power at low input voltage. Typical DIN Rail power supply with
similar specifications starts to de-rate at input voltage below 90Vac.
Model Information
CliQ DIN Rail Power Supply
Model Number
Input Voltage Range
Output
Voltage
Output Current
85-264Vac
24Vdc
2.5A
DRP024V060W1N□
Model Numbering
DRP
P
024V
060W
Output Power
1
N
□
DIN Rail
Power Supply
Output Voltage
Single Phase
NEC Class 2
Y – Plastic case,
with Class I, Div 2
Z – Plastic case,
without Class I, Div 2
All parameters are specified at 25°C ambient unless otherwise noted.
www.DeltaPSU.com (September 2013, Rev. 03)
1