Pneumatic Pressure / Vacuum Hand Pumps (direct acting)
DPPV (100 psi / 7 bar) pressure, (-25”Hg / -635 mm Hg) vacuum
The ideal solution for either differential pressure or vacuum calibration
using a precision test gauge or pressure calibrator as the pressure refer-
ence.
Features:
Generate either 100 psi (7 bar) pressure or -25”Hg (-635 mm Hg) vacuum
with the same pump
Unique design allows the user to convert from pressure to vacuum by
simply twisting a knob, even with gloves on
Two outlet ports allow connection to reference pressure gauge or pressure
calibrator as well as device under test, thus eliminating a tee
Large volume fine adjustment piston provides precise control, even at very
low pressures
Precisely vent pressure with soft seated bleed valve
Low volume Quick-test hose, gauge adapter and process connection can
be attached to pump without thread sealant or a wrench
Rugged, all metal construction reduces pressure changes due to tempera-
ture fluctuations
Made in U.S.A.
Specifications
Pump connection type
Maximum pressure
Maximum vacuum
Style
National Pipe Thread (NPT)
100 psi (7 bar)
British Parallel Thread (BSPP)*
100 psi (7 bar)
-25”Hg (-635 mm Hg)
Direct acting
-25”Hg (-635 mm Hg)
Direct acting
Pressure media
Air
Air
Fine adjust resolution
Reference connection (brass)
Outlet port 1 (brass)
Outlet port 2 (brass)
Calibration hose (brass ends)
Process connection (brass)
Construction
0.001 psi (0.07 mbar)
0.001 psi (0.07 mbar)
See below
See below
Male Quick-test (QTHA-3SB0)
Male Quick-test with cap and chain (QTFT-3SB0)
(1) 3 ft (92 cm) long (QTQT-HOS-3’)
(1) 1/4”male NPT (QTHA-2MB0)
Anodized aluminum, brass, plated steel
Buna-N,Teflon™, Delrin™
1.9 lb (860 g)
Male Quick-test (QTHA-3SB0)
Male Quick-test with cap and chain (QTFT-3SB0)
(1) 1 m (3.3 ft) long (QTQT-HOS-1m)
(1) 1/4”female BSPP (QTHA-2FB0-RG)
Anodized aluminum, brass, plated steel
Buna-N,Teflon™, Delrin™
1.9 lb (860 g)
Seal material
Weight
Ordering Information
DPPV pumps with NPT connections
Model
Description
DPPV-1MBA
DPPV pump, 1/8”male NPT gauge adapter (QTHA-1MBA), hose, process connection
DPPV pump, 1/4”female NPT gauge adapter (QTHA-2MBA), hose, process connection
DPPV pump, 1/4”female NPT gauge adapter (QTHA-2FBA), hose, process connection
DPPV pump, no gauge adapter, with hose and process connection
DPPV-2MBA
DPPV-2FBA
DPPV-0000
DPPV pumps with BSPP connections*
Model
Description
DPPV-2FBA-RG
DPPV pump, 1/4”female BSPP gauge adapter (QTHA-2FBA-RG), hose, process connection
DPPV pump, 3/8”female BSPP gauge adapter (QTHA-3FBA-RG), hose, process connection
DPPV pump, 1/2”female BSPP gauge adapter (QTHA-4FBA-RG), hose, process connection
DPPV-3FBA-RG
DPPV-4FBA-RG
* Not for sale in North American market
For accessories, repair kits and hoses see page 17. For a complete list of accessories and parts see product manual or detailed specification sheet.
For a list of the most commonly used gauge and process connections see page 18. For a complete list refer to Ralston Instruments Pressure
Connection catalog. Contact your Ralston Instruments dealer or the factory for information on reference gauges and pressure calibration kits.
Ralston Instruments, LLC
www.ralstoninst.com
1.800.347.6575