Document 284-1
SMT Power Inductors - DO5010H Series
• Irms ratings up to 15 A; saturation currents up to 30 A
• Heavy gauge wire for low DC resistance
Designer’s Kit C355 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 3.2 – 4.0 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 250 per 13″ reel Plastic tape: 32 mm wide,
0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR
max
SRF
typ3
1. When ordering, please specify termination and packaging codes:
DO5010H-105MLD
Inductance2
Isat4 Irms5
PartNumber1
±20%(µH) (mOhm) (MHz)
(A)
(A)
Termination: L = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape.
DO5010H-781ML_
DO5010H-152ML_
DO5010H-222ML_
DO5010H-332ML_
DO5010H-392ML_
0.78
1.5
2.2
3.3
3.9
2.6
4.0
6.1
8.6
156
100
75
60
55
30
25
20
17
15
15
15
12
10
10
9.0
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
DO5010H-472ML_
DO5010H-602ML_
DO5010H-782ML_
DO5010H-103ML_
DO5010H-123ML_
4.7
6.0
7.8
10
12
14
17
18
26
28
40
35
35
28
26
13
12
11
10
8.4
7.5
7.5
6.0
5.2
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A
LCR meter or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
8.5
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
DO5010H-153ML_
DO5010H-223ML_
DO5010H-333ML_
DO5010H-473ML_
DO5010H-683ML_
15
22
33
47
68
32
47
66
86
130
20
20
15
9
8.0
7.0
5.5
4.5
3.5
4.4
3.5
3.0
2.6
2.3
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
8
DO5010H-104ML_
DO5010H-154ML_
DO5010H-224ML_
DO5010H-334ML_
DO5010H-474ML_
100
150
220
330
470
190
250
380
560
850
7
6
5
4
3
3.0
2.6
2.4
1.9
1.4
1.8
1.5
1.2
1.0
0.82
DO5010H-684ML_
DO5010H-105ML_
680
1000
1100
1800
2.5
2.0
1.2
1.0
0.72
0.56
Specifications subject to change without notice.
Please check our website for latest information.
Document284-1 Revised10/14/08
© Coilcraft, Inc. 2009