Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 295-1
SMT Power Inductors - DO3314
• Only 3.3 mm square, 1.4 mm high!
• Handles current up to 1.7 Amps rms
AEC
+
Q200 85°C
Designer’s Kit C358 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 45.9– 50.2 mg
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +125°C( ambient + temp rise)
Storage temperature Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
L2
DCR3 SRF4
max typ
1. When ordering, please specify termination and packaging codes:
±±20
Isat5 Irms6
(A) (A)
DO3314-333MLC
Part number1
(µH) (Ohms) (MHz)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
DO3314-102ML_
DO3314-152ML_
DO3314-222ML_
DO3314-332ML_
DO3314-472ML_
DO3314-682ML_
DO3314-822ML_
DO3314-103ML_
DO3314-153ML_
DO3314-223ML_
1.0
1.5
2.2
3.3
4.7
6.8
8.2
10
0.11
0.14
0.20
0.26
0.32
160
140
90
80
60
2.10 1.70
2.00 1.40
1.60 1.30
1.40 1.20
1.20 1.10
0.92 0.80
0.90 0.75
0.80 0.75
0.68 0.65
0.56 0.50
D = 13″ machine-ready reel. EIA-481 embossed plastic
0.44
0.47
0.52
0.86
1.20
45
45
40
30
20
tape (3500 parts per full reel).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
15
22
33
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4191A or equivalent.
DO3314-333ML_
1.62
15
0.51 0.40
5. DC current at which the inductance drops 10% (typ) from its value
without current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering
Document 295-1 Revised 08/24/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.