DLP3000
www.ti.com
DLPS022 –JANUARY 2012
®
DLP 0.3 WVGA Series 220 DMD
Check for Samples: DLP3000
1
FEATURES
2
•
0.3-Inch (7.62 mm) Diagonal Micromirror Array
•
Package Mates to PANASONIC AXT550224
Socket
–
608 × 684 Array of Aluminum,
Micrometer-Sized Mirrors
APPLICATIONS
–
–
7.6-µm Micromirror Pitch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Machine Vision
±12° Micromirror Tilt Angle (Relative to Flat
State)
Industrial Inspection
3D Scanning
–
–
Side Illumination for Optimized Efficiency
3D Optical Metrology
3-µs Micromirror Cross Over Time
Automated Fingerprint Identification
Face Recognition
•
Highly Efficient in Visible Light (420 nm–720
nm):
–
Window Transmission 97% (Single Pass,
Through Two Window Surfaces)
Augmented Reality
Embedded Display
Interactive Display
Information Overlay
Spectroscopy
–
–
–
–
Micromirror Reflectivity 88%
Array Diffraction Efficiency 86%
Array Fill Factor 92%
Polarization Independent
Chemical Analyzers
Medical Instruments
Photo-Stimulation
Virtual Gauges
•
•
Up to WVGA Resolution (854x480) Wide
Aspect Ratio Display
Low Power Consumption, only 200 mW
(Typical)
•
•
•
•
•
•
15-Bit, Double Data Rate (DDR) Input Data Bus
60-MHz to 80-MHz Input Data Clock Rate
Integrated Micromirror Driver Circuitry
Supports –10 °C to 70 °C
16.6-mm by 7-mm by 5-mm Package Footprint
Dedicated DLPC300 Controller for Reliable
Operation
DESCRIPTION
The DLP3000 digital micromirror device (DMD) is a digitally controlled MOEMS (micro-opto-electromechanical
system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP3000 can be used
to modulate the amplitude, direction, and/or phase of incoming light. The DLP3000 creates light patterns with
speed, precision, and efficiency.
Architecturally, the DLP3000 is a latchable, electrical-in/optical-out semiconductor device. This architecture
makes the DLP3000 well suited for use in applications such as 3D scanning or metrology with structured light,
augmented reality, microscopy, medical instruments, and spectroscopy. The compact physical size of the
DLP3000 is well-suited for portable equipment where small form factor and lower cost are important. The
compact package compliments the small size of LEDs to enable highly efficient, robust light engines.
The DLP3000 is one of two devices in the DLP 0.3 WVGA chipset (see Figure 1). Proper function and reliable
operation of the DLP3000 requires that it be used in conjunction with the DLPC300 controller. See the DLP 0.3
WVGA Chip-set data sheet (TI literature number DLPZ005) for further details. Figure 2 shows a typical system
application using the DLP 0.3-inch WVGA chipset.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
DLP is a registered trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
