DG2722
Vishay Siliconix
2 Port, USB 2.0 High Speed (480 Mbps) Switch,
DPDT Analog Switch
FEATURES
DESCRIPTION
•
Halogen-free according to IEC 61249-2-21
Definition
The DG2722 is 2 port high speed analog switch optimized for
USB 2.0 signal switching. The DG2722 switch is configured
in DPDT. It handles bidirectional signal flow, achieving a
900 MHz - 3 dB bandwidth, and a port to port crosstalk and
isolation at - 49 dB.
Processed with high density sub micron CMOS, the DG2722
provide low parasitic capacitance. Signals are routed with
minimized phase distortion and attain a bit to bit skew is as
low as 40 pS.
The DG2722 is designed for a wide range of operating
voltages, from 2.7 V to 4.3 V that can be driven directly from
one cell Li-ion battery. On-chip circuitry protects against
conditions when either the D+/D- lines are shorted to the
VBUS at the USB port. Additionally, logic control pins (S and
OE) can tolerate the presence of voltages that are above the
supply power rail (V+). The control logic threshold is
guaranteed to be (VIH = 1.3 V/min). Latch up current is
300 mA, as per JESD78, and its ESD tolerance exceeds
8 kV.
•
•
•
•
•
•
•
•
Wide operation voltage range
Low on-resistance, 7 (typical at 3 V)
Low capacitance, 6.5 pF (typical)
3 dB high bandwidth: 900 MHz (typical)
Low bit to bit skew: 40 pS (typical)
Low power consumption
Low logic threshold: V
Power down protection: D+/D- pins can tolerate up to
5 V when V+ = 0 V
•
•
•
•
Logic (S and OE) above V+ tolerance
8 kV ESD protection (HBM)
Latch-up current 300 mA per JESD78
Lead (Pb)-free low profile miniQFN-10 (1.4 mm x 1.8 mm
x 0.55 mm)
•
Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
• Cellular phones
Packaged in ultra small miniQFN-10 (1.4 mm x 1.8 mm x
0.55 mm), it is ideal for portable high speed mix signal
switching application.
•
•
•
•
•
•
Portable media players
PDA
Digital camera
GPS
Notebook computer
TV, monitor, and set top box
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product with
lead (Pb)-free device termination. The miniQFN-10 package
has a nickel-palladium-gold device termination and is
represented by the lead (Pb)-free “-E4” suffix to the ordering
part number. The nickel-palladium-gold device terminations
meet all JEDEC standards for reflow and MSL rating.
As a further sign of Vishay Siliconix's commitment, the
DG2722 is fully RoHS complaint.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
miniQFN-10L
6
7
5
4
3
HSD2+
HSD2-
GND
OE
8
V+
9
Rx
S
10
1
2
Pin 1
Pin 1: LONG LEAD
Device marking: Rx for DG2722
x = Date/Lot Traceability Code
Top View
Document Number: 68379
S11-1430-Rev. D, 18-Jul-11
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000