DG2731/2732/2733
Vishay Siliconix
Low Voltage, 0.4 Ω, Dual SPDT Analog Switch
DESCRIPTION
FEATURES
•
•
•
•
Low Voltage Operation (1.65 V to 4.3 V)
Low On-Resistance - rON: 0.3 Ω@ 3.6 V
Fast Switching: TON = 50 ns @ 4.3 V
The DG2731/2732/2733 are low voltage, low on-resis-
tance, dual single-pole/double-throw (SPDT) mono-
lithic CMOS analog switches designed for high
performance switching of analog signals. Combining
low-power, high speed, low on-resistance, and small
package size, the DG2731/2732/2733 are ideal for
portable and battery power applications.
RoHS
COMPLIANT
T
OFF = 14 ns @ 4.3 V
• Latch-Up Current > 300 mA (JESD78)
BENEFITS
The DG2731/2732/2733 have an operation range from
1.6 V to 4.3 V single supply. The DG2731 and DG2732
have two separate control pins with reverse control
logic. The DG2733 has an EN pin to enable the device
when the logic is high.
• Reduced Power Consumption
•
•
•
High Accuracy
Reduce Board Space
TTL/1.6-V Logic Compatible
The DG2731/2732/2733 are 1.6-V logic compatible,
allowing the easy interface with low voltage DSP or
MCU control logic and ideal for one cell Li-ion battery
direct power.
The switch conducts signals within power rails equally
well in both directions when on, and blocks up to the
power supply level when off. Break-before-make is
guaranteed.
The DG2731/2732/2733 are built on Vishay Siliconix's
sub micron CMOS low voltage process technology and
provides greater than 300 mA latch-up protection, as
tested per JESD78.
APPLICATIONS
• Cellular Phones
•
•
•
Speaker Headset Switching
Audio and Video Signal Routing
PCMCIA Cards
• Battery Operated Systems
FUNCTIONAL BLOCK DIAGRAM AND PIN
CONFIGURATION
As a committed partner to the community and the envi-
ronment, Vishay Siliconix manufactures this product
with lead (Pb)-free device terminations. DG2731/2732/
2733 are offered in a DFN or MSOP package. The
DFN package has a nickel-palladium-gold device ter-
mination and is represented by the lead (Pb)-free "-E4"
suffix. The MSOP package uses 100% matte Tin
device termination and is represented by the lead (Pb)-
free "-E3" suffix. Both the matte Tin and nickel-palla-
dium-gold device terminations meet all JEDEC stan-
dards for reflow and MSL ratings.
Document Number: 73484
S-51920–Rev. A, 12-Sep-05
www.vishay.com
1