Reference Only
Chip Coil (Chip Inductors) DFE2MCAH□□□□J0L REFERENCE SPECIFICATION
Spec No. JETE243A-9107E-01
P 1/9
Murata Standard Specification【AEC-Q200】
1. Scope
This reference specification applies to DFE2MCAH□□□□J0L, Chip Coil (Chip Inductors) for Automotive
Electronic based on AEC-Q200.
2.Part Numbering
(ex)
DF
Product
ID
E
2M
CA
H
1R0
M
J
0
L
Structure Dimension Applications
Category
Inductance Tolerance Dimension Other Packaging
(T)
(L×W)
and
Characteristics
3.Rating
Operating Temperature Range
(Ambient temperature; Self-temperture rise is not included)
(Product temperature; Self- temperature rise is included)
Storage Temperature Range.
-40°C to +110°C
-40°C to +150°C
-40°C to +110°C
It can be considered for use with DCDC converters with a maximum voltage of 40 V or less.
*3 Rated Current
DC
Resistance
(A)
Inductance
Tolerance
Customer
Part Number
Murata
Part Number
ESD
Level
∗1 Based on
∗2 Based on
Inductance change Temperature rise
(µH)
Max. (Ω)
(%)
DFE2MCAHR15MJ0L
DFE2MCAHR24MJ0L
0.15
0.24
0.33
0.47
0.68
1.0
0.021
0.025
0.029
0.033
0.042
0.068
0.109
0.169
6.1
5.0
4.2
3.6
3.1
2.5
2.1
1.7
4.8
4.2
3.9
3.5
3.0
2.4
1.8
1.4
DFE2MCAHR33MJ0L
DFE2MCAHR47MJ0L
DFE2MCAHR68MJ0L
DFE2MCAH1R0MJ0L
DFE2MCAH1R5MJ0L
DFE2MCAH2R2MJ0L
±20
<±0.5kV
1.5
2.2
∗1: The saturation allowable DC current value is specified when the decrease of the initial Inductance value at 30%.
*2: Rated current (Based on Temperature rise) is the current value at which the product temperature rises to 40°C when
direct current is applied to the inductor with the product mounted on our designated board.
∗3: Value defined when DC current flows and Rated Current (Based on Inductance change) or when DC current flows
and Rated Current (Based on Temperature rise) whichever is smaller.
4. Testing Conditions (Standard atmospheric conditions)
<Unless otherwise specified>
<In case of doubt>
Temperature
Temperature : Ordinary Temperature (15 to 35°C)
: 20 ± 2°C
Humidity
: Ordinary Humidity (25 to 85% (RH))
Humidity
Atmospheric Pressure
: 65±5% (RH)
: 86 to 106 kPa
5.Appearance and Dimensions
0.5±0.2
■Unit Mass (Typical value)
※no marking
0.0188g
2.0±0.2
1.2max.
(in mm)
MURATA MFG.CO., LTD