Applicable standard
Operating
range
temperature
Storage
range
temperature
-40 ℃ to +105℃ (Note1)
-10 ℃ to +60℃ (Note3)
Operating
Rating
Storage
Humidity range
20% to 80% (Note2)
40% to 70% (Note3)
Humidity range
Applicable contact
Voltage
50
V
AC/DC
DF65-*S-1.7C
AWG24 to AWG 28
Φ0.7 to 1.15 mm
Applicable cable
1
△
Current
AWG24 : 4.0 A
AWG26 : 2.5 A
AWG28 : 2.5 A
Insulation
Diameter
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
Electric characteristics
Contact resistance
20 mV MAX, 1 mA(DC or 1000 Hz).
10 m MAX.
X
X
-
-
Mechanical characteristics
Contact insertion
and extraction
forces
Insertion force
Extraction force
5 N MAX.
0.1 N MIN.
t=0.2±0.002 mm by steel gauge.
Mechanical operation
50 times insertion and extraction.
① Contact resistance: 20 mΩ MAX.
② No damage, crack or looseness of parts.
X
X
X
X
-
-
-
-
Vibration
Shock
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
① No electrical discontinuity of
1μs.
② No damage, crack or looseness of parts.
490 m/s2 duration of pulse 11 ms at 3 times for 3
directions.
1 Tensil strength of
crimped contact
(Note4)
Measure tensil strength in crimped contact core
only.
AWG24:30N MIN
AWG26:15N MIN
AWG28:10N MIN
△
Environmental characteristics
Damp heat(Steady state)
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
① Contact resistance: 20 mΩ MAX.
(After leaving the room temperature for 1 to 2h.)
② No damage, crack or looseness of parts.
X
X
-
-
Rapid change of
temperature
Temperature -55℃→ +85℃
Time
30min→ 30min
Under 5 cycles.
(After leaving the room temperature for 1 to 2h.)
Note 1: Include the temperature rising by current.
Note2:No condensing
Note3:Apply to the condition of long term storage for unused products befor pcb on board, after pcb board , operating temperature and humiditty range is applied
for interim strage during transportation.
Note4:Compliant cable only.
Count
Description of revisions
Designed
Checked
Date
1
2
DIS-H-00001619
YK.YAMAGUCHI
TS.FUKUSHIMA
KI.AKIYAMA
HK.UMEHARA
16.05.13
15.07.29
15.07.29
△
Remarks
Approved
Checked
Designed
Drawn
YK.YAMAGUCHI
YK.YAMAGUCHI
15.07.29
15.07.29
Unless otherwise specified, refer to IEC 60521.
Note QT:Qualification test AT:Assurance test X:Applicable test
Drawing no.
ELC-359800-07-00
DF65-2428SCFA(07)
Part no.
Specification sheet
Hirose electric co., ltd.
1
△
1/1
Code no.
CL666-6016-4-07
FORM HD0011-2-1