APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
STORAGE
-35C TO +85C(NOTE 1)
-10C TO +60C(NOTE 3)
TEMPERATURE RANGE
OPERATING
RATING
40 % TO 80 % (NOTE 2)
40 % TO 70 %(NOTE 3)
HUMIDITY RANGE
HUMIDITY RANGE
CURRENT
APPLICABLE
VOLTAGE
APPLICABLE
1
A/pin
150 V AC (DC)
DF14-****SCFA(##)
DF14-*S-1.25C
CONNECTOR
CONTACT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
20 mV MAX, 1mA (DC OR 1000 Hz)
30 m MAX.
500 M MIN.
X
X
X
-
-
-
INSULATION
100 V DC.
RESISTANCE
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
50 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESISTANCE: 30 m MAX.
2) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
X
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE
0.75 mm, AT 2 h, FOR 3 DIRECTIONS.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
1) NO ELECTRICAL DISCONTINUITY OF 1s.
2) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55→ 5 TO 35→ +85→ 5 TO 35 C 1) CONTACT RESISTANCE: 30m MAX.
X
X
TIME
30→ 10 TO 15→30→ 10 TO 15 min. 2) INSULATION RESISTANCE: 500 M MIN.
-
-
UNDER 5 CYCLES.
3) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
DAMP HEAT
(STEADY STATE)
RESISTANCE TO
SOLDERING
HEAT
EXPOSED AT 40±2 C, 90 ~ 95 , 96 h.
1) REFLOW SOLDERING
NO DEFORMATION OF CASE OF
EXCESSIVE LOOSENESS OF THE
TERMINALS.
≪REFLOW AREA≫
MAX 250C
MIN 230C
WITHIN 10 sec
WITHIN 60 sec
≪PREHEATING AREA≫
170C TO 190C
60 sec TO 120 sec
PUT THROUGH IN REFLOW FUMACE TWICE.
LEAVE IN AMBIENT TEMPERATURE AND
HUMIDITY FOR 1 HOUR.
CONNECTOR TEMPERTURE TO BE
AMBIENT FOR SECOND REFLOW.
2) MANUAL SOLDERING
SOLDERING IRON TEMPERATURE
350±5 C, FOR5±1 sec.
NO STRENGTH ON CONTACT.
SOLDERABILITY
REMARKS
A NEW UNIFORM COATING OF SOLDER
SHALL COVER MINIMUM OF 95 OF THE
SURFACE BEING IMMERSED.
SOLDERING TEMPERATURE : 245±5C
DURATION OF IMMERSION :
SOLDERING, FOR 3sec.
-
X
NOTE1: INCLUDING THE TEMPERATURE RISE BY CURRENT
NOTE2: NO CONDENSING
NOTE3: APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFORE MOUNTED ON PCB.
AFTER MOUNTED ON PCB, OPERATING TEMPERATURE AND HUMIDITY RANGE IS APPLIED FOR INTERIM STORAGE DURING TRANSPORTATION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
Unless otherwise specified, refer to IEC 60512.
APPROVED
CHECKED
DESIGNED
DRAWN
HS.OKAWA
TS.KUMAZAWA
HK.HAYASHI
20200313
20200313
20200313
20200306
DS.HIROWATARI
Note QT: Qualification Test AT: Assurance Test X:Applicable Test
ELC-160309-52-00
DF14A-*P-1.25H(52)
DRAWING NO.
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL538
FORM HD0011-2-1