APPLICABLE STANDARD
OPERATING
STORAGE
-35C TO +85 C(NOTE 1)
20 % TO 80 % (NOTE 2)
150 V AC
-10C TO +60C(NOTE 3)
TEMPERATURE RANGE
OPERATING
TEMPERATURE RANGE
STORAGE
40 % TO 70 %(NOTE 3)
HUMIDITY RANGE
HUMIDITY RANGE
APPLICABLE
RATING
VOLTAGE
DF13-*S-1.25C
CONNECTOR
APPLICABLE CONTACT
CURRENT
1
A
DF13(G)-2630SCFA,
DF13-3032SCFA
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 m A (DC OR 1000 Hz).
30 m MAX.
500 M MIN.
X
X
-
-
INSULATION RESISTANCE
100 V DC.
VOLTAGE PROOF
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
X
-
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION 50 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 30 m MAX.
② NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE
0.75 mm, AT 2 h, FOR 3 DIRECTIONS.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 1s.
② NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
X
-
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55→ 5 TO 35→+85→ 5 TO 35 C
TIME 30→ 10 TO 15→ 30→ 10 TO 15 min.
① CONTACT RESISTANCE:
30m MAX.
② INSULATION RESISTANCE: 500 M MIN.
③ NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
-
-
-
X
UNDER 5 CYCLES.
DAMP HEAT
EXPOSED AT 40 ± 2 C, 90 TO 95 , 96 h.
(STEADY STATE)
RESISTANCE TO
SOLDERING HEAT
X
X
1) REFLOW SOLDERING
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
≪REFLOW AREA≫
MAX250℃ WITHIN 10 sec
MIN 230℃ WITHIN 60 sec
≪PREHEATING AREA≫
170℃ to 190℃ 60 sec to 120 sec
PUT THROUGH IN REFLOW FURNACE TWICE,
LEAVE IN AMBIENT TEMPERATURE AND
HUMIDITY FOR 1 HOUR.
2) MANUAL SOLDERING
SOLDERING IRON TEMPERATURE :350℃,
SOLDERING TIME : 3sec.
NO STRENGTH ON CONTACT.
SOLDERED AT SOLDER TEMPERATURE,
245±5C FOR INSERTION DURATION, 3sec.
SOLDERABILITY
REMARKS
SOLDER SHALL COVER A MINIMUM OF
-
X
95 OF THE SURFACE BEING IMMERSED.
NOTE1: INCLUDE THE TEMPERATURE RISING BY CURRENT.
NOTE2: NO CONDENSING.
NOTE3: APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFORE MOUNTED ON PCB.
AFTER MOUNTED ON PCB BOARD, OPERATING TEMPERATURE AND HUMIDITY RANGE IS APPLIED FOR INTERIM STORAGE DURING
TRANSPORTATION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
Unless otherwise specified, refer to IEC 60512.
APPROVED
CHECKED
DESIGNED
DRAWN
HS.OKAWA
TS.FUKUSHIMA
TS.KUMAZAWA
MK.INOUE
18.04.05
18.04.05
18.04.05
18.04.05
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-083664-76-00
DF13-*P-1.25V(76)
DRAWING NO.
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL536
FORM HD0011-2-1