DCQAW150 SERIES
Up to 132 Watts
Rev D
Quarter-Brick DC/DC Converters
FEATURES
• Soft Start
• Up to 132 Watts Maximum Output Power
• Single Outputs
• 2250VDC I/O Basic Insulation
• Input Under Voltage Protection
• High Efficiency up to 90%
• Remote ON/OFF Control
• 4:1 Ultra Wide Input Voltage Ranges
• No Minimum Load Required
• Low Stand-by Power Consumption
• Industry Standard Quarter-brick
Package
• Short Circuit, Over Voltage, Over Load, & Over Temp. Protection
• UL60950-1, EN60950-1, IEC60950-1, EN45545-2 & EN50155
Safety Approvals
• CE Marked
• Compliant to RoHS II & REACH
• Optional Heatsinks Available
• Threaded (Standard) or Thru-Hole (Optional) Inserts Available
• Railway Applications
Size:
2.28 x 1.45 x 0.50 inches
(57.9 x 36.8 x 12.7 mm)
DESCRIPTION
Applications:
• Railway Systems
• Automation
• Telecom/Datacom
• Industry Control Systems
• IPC
The DCQAW150 series of DC/DC power converters provides up to 132 Watts of output power in a 2.28” x
1.45” x 0.5” industry standard quarter-brick package. This series has single output models with 4:1 wide input
voltage ranges of 8.5-36VDC, 16.5-75VDC, and 40-160VDC. Some features include high efficiency up to 90%,
2250VDC I/O basic insulation, and remote ON/OFF control. These converters are also protected against input
under voltage, short circuit, over voltage, over load, and over temperature conditions. All models are RoHS
compliant and have UL60950-1, EN60950-1, IEC60950-1, EN45545-2 and EN50155 safety approvals. Several
different options are available for this series including negative logic remote ON/OFF, heatsinks, and thru-hole
inserts.
• Measurement
MODEL SELECTION TABLE
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
Output Current
Output
No Load
Output
Power
99W
120W
120W
120W
120W
120W
120W
99W
120W
120W
120W
120W
120W
120W
99W
120W
132W
129W
132W
132W
129.6W
Maximum
Capacitive Load
91,000µF
48,000µF
8300µF
Model Number
Input Voltage
Efficiency
Min Load
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
Max Load Ripple & Noise Input Current
DCQAW150-24S33
DCQAW150-24S05
DCQAW150-24S12
DCQAW150-24S15
DCQAW150-24S24
DCQAW150-24S30
DCQAW150-24S48
DCQAW150-48S33
DCQAW150-48S05
DCQAW150-48S12
DCQAW150-48S15
DCQAW150-48S24
DCQAW150-48S30
DCQAW150-48S48
DCQAW150-110S33
DCQAW150-110S05
DCQAW150-110S12
DCQAW150-110S15
DCQAW150-110S24
DCQAW150-110S30
DCQAW150-110S48
30A
24A
10A
8A
5A
4A
2.5A
30A
24A
10A
8A
75mVp-p
75mVp-p
25mA
25mA
25mA
25mA
25mA
25mA
25mA
15mA
15mA
15mA
15mA
15mA
15mA
15mA
8mA
88%
89%
88%
89%
88%
89%
88%
88%
89%
89%
90%
90%
90%
90%
88%
89%
88%
89%
89%
89%
89%
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
75mVp-p
24 VDC
5300µF
2100µF
1300µF
520µF
91,000µF
48,000µF
8300µF
5300µF
2100µF
1300µF
520µF
91,000µF
48,000µF
9170µF
5730µF
2290µF
1470µF
560µF
(8.5 - 36 VDC)
75mVp-p
48 VDC
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
75mVp-p
(16.5 - 75
VDC)
5A
4A
2.5A
30A
24A
11A
8.6A
5.5A
4.4A
2.7A
75mVp-p
8mA
8mA
8mA
8mA
8mA
8mA
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
110 VDC
(40 - 160 VDC)
NOTES
1. Input Source Impedance: The power modules will operate to specifications without external components, assuming that the source voltage has very low
impedance and reasonable input voltage regulation. Highly inductive source impedances can affect the stability of the power module. Since real-world
voltage sources have finite impedance, performance is improved by adding an external filter capacitor.
- For 24VDC & 48VDC input models we recommend using Nippon Chemi-con KY series, 100µF/100V.
- For 110VDC input models we recommend using Ruby-con BXF series, 39µF/200V.
2. If remote sense is not being used, sense pins should connect to the output pins with same polarity.
3. The DCQAW150 series can only meet EMI Class A or Class B with external components added. Please contact factory for more information.
4. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
- For 24VDC & 48VDC input models we recommend with 2pcs of aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V)
- For 110VDC input models we recommend with 3pcs of aluminum electrolytic capacitor (Ruby-con BXF series, 100µF/250V).
5. Both positive logic and negative logic remote ON/OFF control is available. Positive logic remote ON/OFF comes standard; for negative logic remote
ON/OFF add the suffix “R” to the model number (Ex: DCQAW150-48S24R).
6. Optional heatsinks available. See page 5 for ordering details.
7. M3 x 0.5 threaded-thru inserts come standard. For Ø.126 thru-hole inserts add the suffix “TH” to the model number (Ex: DCQAW150-48S24TH). Models
with thru-hole inserts cannot be equipped with a heatsink.
8. BASE-PLATE GROUNDING: EMI can be reduced when you connect two screw bolts to shield plane.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
09/19/2017
Fax 603-778-9797
Page 1 of 7
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
