Datasheet > 转换器 > 数模转换器> DAC102S085CIMMX

DAC102S085CIMMX

更新时间： 2024-01-29 01:21:21

品牌	Logo	应用领域
德州仪器 - TI		转换器数模转换器光电二极管
页数	文件大小	规格书
28页	1135K
描述
DAC102S085 10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

DAC102S085CIMMX 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	SON
包装说明：	LLP-10	针数：	10
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.14
Is Samacsys：	N	最大模拟输出电压：	5.5 V
最小模拟输出电压：		转换器类型：	D/A CONVERTER
输入位码：	BINARY	输入格式：	SERIAL
JESD-30 代码：	S-PDSO-N10	JESD-609代码：	e0
长度：	3 mm	最大线性误差 (EL)：	0.1953%
湿度敏感等级：	1	位数：	10
功能数量：	1	端子数量：	10
最高工作温度：	105 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	HVSON
封装等效代码：	SOLCC10,.11,20	封装形状：	SQUARE
封装形式：	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	峰值回流温度（摄氏度）：	260
电源：	3/5 V	认证状态：	Not Qualified
座面最大高度：	0.8 mm	最大稳定时间：	6 µs
标称安定时间 (tstl)：	4.5 µs	子类别：	Other Converters
最大压摆率：	0.41 mA	标称供电电压：	3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Tin/Lead (Sn/Pb)
端子形式：	NO LEAD	端子节距：	0.5 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	3 mm	Base Number Matches：	1

DAC102S085CIMMX 数据手册

DAC102S085

www.ti.com

SNAS364E –MAY 2006–REVISED MARCH 2013

Absolute Maximum Ratings^(1)(2)(3)

Supply Voltage, V_A

6.5V

−0.3V to 6.5V

10 mA

Voltage on any Input Pin

Input Current at Any Pin⁽⁴⁾

Package Input Current⁽⁴⁾

20 mA

Power Consumption at T_A= 25°C

See⁽⁵⁾

Human Body Model

Machine Model

2500V

ESD Susceptibility⁽⁶⁾

250V

Junction Temperature

Storage Temperature

+150°C

−65°C to +150°C

(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions. Operation of the device beyond the maximum Operating

Ratings is not recommended.

(2) All voltages are measured with respect to GND = 0V, unless otherwise specified.

(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and

specifications.

(4) When the input voltage at any pin exceeds 5.5V or is less than GND, the current at that pin should be limited to 10 mA. The 20 mA

maximum package input current rating limits the number of pins that can safely exceed the power supplies with an input current of 10

mA to two.

(5) The absolute maximum junction temperature (T_Jmax) for this device is 150°C. The maximum allowable power dissipation is dictated by

T_Jmax, the junction-to-ambient thermal resistance (θ_JA), and the ambient temperature (T_A), and can be calculated using the formula

P_DMAX = (T_Jmax − T_A) / θ_JA. The values for maximum power dissipation will be reached only when the device is operated in a severe

fault condition (e.g., when input or output pins are driven beyond the operating ratings, or the power supply polarity is reversed).

(6) Human body model is 100 pF capacitor discharged through a 1.5 kΩ resistor. Machine model is 220 pF discharged through ZERO

Ohms.

Operating Ratings⁽¹⁾⁽²⁾

Operating Temperature Range

−40°C ≤ T_A≤ +105°C

+2.7V to 5.5V

+1.0V to V_A

Supply Voltage, V_A

Reference Voltage, V_REFIN

Digital Input Voltage⁽³⁾

Output Load

0.0V to 5.5V

0 to 1500 pF

SCLK Frequency

Up to 40 MHz

(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions. Operation of the device beyond the maximum Operating

Ratings is not recommended.

(2) All voltages are measured with respect to GND = 0V, unless otherwise specified.

(3) The inputs are protected as shown below. Input voltage magnitudes up to 5.5V, regardless of V_A, will not cause errors in the conversion

result. For example, if V_Ais 3V, the digital input pins can be driven with a 5V logic device.

I/O

TO INTERNAL

CIRCUITRY

GND

Package Thermal Resistances⁽¹⁾⁽²⁾

Package

θ_JA

10-Lead VSSOP

10-Lead SON

240°C/W

250°C/W

(1) Soldering process must comply with Texas Instruments' Reflow Temperature Profile specifications. Refer to www.ti.com/packaging.

(2) Reflow temperature profiles are different for lead-free packages.

Submit Documentation Feedback

Product Folder Links: DAC102S085

1 234 5 6 7...28

下载PDF

与DAC102S085CIMMX相关器件

型号	品牌	描述	获取价格	数据表
DAC102S085CIMMX/NOPB	TI	具有轨到轨输出的 10 位微功耗双路数模转换器 \| DGS \| 10 \| -40 to 1	获取价格
DAC102S085CISD	TI	DAC102S085 10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail	获取价格
DAC102S085CISD	NSC	10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output	获取价格
DAC102S085CISD/NOPB	TI	具有轨到轨输出的 10 位微功耗双路数模转换器 \| DSC \| 10 \| -40 to 1	获取价格
DAC102S085CISDX	TI	DAC102S085 10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail	获取价格
DAC102S085CISDX	NSC	10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output	获取价格

与DAC102S085CIMMX相关文章

资料手册解读：UC3842参数和管脚说明
2024-05-22

3
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
2024-05-22

4
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
2024-05-22

2
PCF8574资料解读：主要参数分析、引脚说明
2024-05-21

11

产品中心

服务支持

精选活动

关于我们

帮助中心

DAC102S085CIMMX

DAC102S085CIMMX 技术参数

DAC102S085CIMMX 数据手册

与DAC102S085CIMMX相关器件

与DAC102S085CIMMX相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DAC102S085CIMMX

DAC102S085CIMMX 技术参数

DAC102S085CIMMX 数据手册

与DAC102S085CIMMX相关器件

与DAC102S085CIMMX相关文章

您还可以找

您在本页遇到什么问题？