Moisture Barrier Bag Dri-Shield® 3000
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541,
Static Control Bag ANSI/ESD S11.4 Level 1, and IPC/JEDEC J-STD-033.
This foil moisture barrier bag provides protection for ESD sensitive
and moisture sensitive electronics, typically SMT (Surface Mount
Technology) items. Best practice is to use with Desiccant and a
Humidity Indicator Card. A nylon layer helps to strengthen the bag.
The bags are heat sealable and suitable for vacuum packaging.
Bags are printed with ESD protective and moisture sensitive warning
symbols, and a lot code for traceability.
Physical
Typical Value
Testing Method
Moisture Vapor
Transmission Rate
(MVTR)
< 0.0003 grams/100 sq. in./24 hrs ASTM F1249
< 0.002 grams/100 sq. in./24hrs
ASTM F392 condition E and
ASTM F2149
Tensile Strength
Puncture Resistance
Seal Strength
Thickness
3800 PSI, 26 MPa
16 lbs, 71 N
ASTM D882
MIL-STD-3010C Method 2065
ASTM D882
SCS Moisture Barrier Bags Dri-Shield® 3000 are manufactured from
a laminate of nylon, foil, and polyethylene. The metal layer provides
discharge shielding and minimizes the penetration of electric fields
and electrostatic discharges.
15 lbs, 66 N
6 mils, 0.006" +/-10%
Pass
MIL-STD-3010C Method 1003
IPC-TM-650 2.4.1
Testing Method
Marking Adhesion
Electrical
OPENING
Typical Value
<10 nJ
1 x 104 to < 1 x 1011 ohms
OFFSET
ESD Shielding
ANSI/ESD STM11.31
ANSI/ESD STM11.11
Surface Resistance -
Interior
Surface Resistance -
Exterior
1 x 104 to < 1 x 1011 ohms
ANSI/ESD STM11.11
** Bags are printed (hot stamp or thermal) with an ESD
protective symbol and a lot code for traceability. **
Moisture Barrier Bag
®
DRI-SHIELD 3000
Discharge Shielding
EMI Attenuation
Cleanliness
Silicone
45 dB
1 to 10 GHz
Testing Method
FTIR
LENGTH
SEAL
Typical Value
Not Detected
Tolerance: Width -0, +1/4"
Length +/- 1/8" Offset 0 to 1/4"
Seal width 3/8" with a tolerance of +/- 1/8"
7
11
ATTENTION: Contents may be
Moisture and Static Sensitive
OTHER PA/ALU/PE
Heat Sealing Conditions Typical Value
LOT 40910987654321
Note: Standard bag markings shown
above are not to scale.
Temperature
Time
400°F, 204°C
0.6 – 4.5 seconds
FOLD
Pressure
30 – 70 PSI, 206 – 482 KPa
SEAL
WIDTH
WIDTH
Bag is free of amines, silicones and heavy metals.
STATIC DISSIPATIVE
NYLON
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
FOIL SHIELD
NOTE: The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags - To Protect
STATIC DISSIPATIVE
POLYETHYLENE
Desiccants - To Absorb Moisture
Humidity Indicator Cards - To Monitor Performance
SCS Moisture Barrier Bags are packaged in a polyethylene bag.
RoHS, REACH, and Conflict Minerals Statement
See the SCS RoHS, REACH, and Conflict Minerals Statement:
http://staticcontrol.com/PDF/Regulatory_Statement_SCS_Bags.pdf
Made in the United States of America with Globally Sourced Materials.
Specifications and procedures subject to change without notice.
See the SCS Limited Warranty:
StaticControl.DescoIndustries.com/Limited-Warranty.aspx
DRI-SHIELD® 3000 MOISTURE BARRIER BAG
DRAWING
NUMBER
Dri-Shield® 3000
DATE
September
2021
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
© 2021 DESCO INDUSTRIES INC
Employee Owned