Moisture Barrier Bag Dri-Shield® 2700
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541,
and Static Control Bag ANSI/ESD S11.4 Level 3 (except Transparency)
This aluminized moisture barrier bag is designed to provide a static
safe environment for sensitive electronic devices. A stronger polyester
layer helps to prevent sharp trays from puncturing the bag. The bags
are heat sealable and suitable for vacuum packaging. Bags are printed
with ESD and moisture warning symbols and a lot code for traceability.
Physical
Typical Value
Testing Method
Moisture Vapor
Transmission Rate
(MVTR)
< 0.030 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030
SCS Moisture Barrier Bags Dri-Shield® 2700 are manufactured from a
laminate of multiple layers of aluminized polyester and polyethylene.
Polyester provides puncture resistance. Metal layers are intended
to provide shielding of Electrostatic Discharge (ESD) and to help
Tensile Strength
Puncture Resistance
Seal Strength
Thickness
6550 PSI, 45 MPa
30 lbs, 133 N
20 lbs, 89 N
ASTM D882
MIL-STD-3010 Method 2065
ASTM D882
7 mils, 0.007" ±10%
Pass
MIL-STD-3010 Method 1003
IPC-TM-650 2.4.1
Testing Method
minimize the penetration of electric field.
OPENING
Marking Adhesion
Electrical
OFFSET
Typical Value
<10 nJ
ESD Shielding
ANSI/ESD STM11.31
ANSI/ESD STM11.11
Tolerance: Width -0, +1/4"
Length ± 1/8" Offset 0 to 1/4"
1 x 104 to < 1 x 1011 ohms
Surface Resistance -
Interior
Seal width 3/8" with a tolerance of ± 1/8"
Moisture Barrier Bag
®
DRI-SHIELD 2700
1 x 104 to < 1 x 1011 ohms
Surface Resistance -
Exterior
ANSI/ESD STM11.11
Note: Standard bag markings shown
above are not to scale.
Discharge Shielding
LENGTH
SEAL
EMI Attenuation
Cleanliness
Silicone
45 dB
1 to 10 GHz
Testing Method
FTIR
7
11
ATTENTION: Contents may be
Moisture and Static Sensitive
OTHER PET/ALU/PE
Typical Value
Not Detected
** Bags are printed (hot stamp or thermal) with
an ESD protective symbol and a lot code for
traceability. **
LOT 48910987654321
Heat Sealing Conditions Typical Value
Temperature
Time
400°F, 204°C
FOLD
0.6 – 4.5 seconds
SEAL
WIDTH
WIDTH
Pressure
30 – 70 PSI, 206 – 482 KPa
HEAVY GAUGE
STATIC DISSIPATIVE POLYESTER
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
ALUMINUM SHIELD
POLYESTER
NOTE: The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags - To Protect
ALUMINUM SHIELD
HEAVY GAUGE
STATIC DISSIPATIVE
POLYETHYLENE
Desiccants - To Absorb Moisture
Humidity Indicator Cards - To Monitor Performance
SCS Moisture Barrier Bags are packaged in a polyethylene bag.
RoHS, REACH, and Conflict Minerals Statement
See the SCS RoHS, REACH, and Conflict Minerals Statement:
http://staticcontrol.com/PDF/Regulatory_Statement_SCS_Bags.pdf
Made in the
United States of America
Specifications and procedures subject to change without notice.
See the SCS Limited Warranty:
StaticControl.DescoIndustries.com/Limited-Warranty.aspx
DRI-SHIELD® 2700 MOISTURE BARRIER BAG
DRAWING
NUMBER
Dri-Shield® 2700
DATE
September
2021
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
© 2021 DESCO INDUSTRIES INC
Employee Owned