Application:
The all LED SafeSite® Series L-864/L-865 Flashing Dual (White/Red) Strobe
is designed for lighting of chimneys, flare stacks, and any other types of
obstruction to aviation in hazardous areas such as power plants,
refineries and chemical plants. The Class I Div. 2 dual L-864 / L-865 uses
LED technology for light output for both the Red and White modes.
US Patent #7,281,821
other patents pending
SafeSite® L-864/L-865
Flashing Dual LED (White/Red) Strobe
Unlike conventional Xenon flashtube technology, little or no mainte-
nance is required during its lifetime. Working voltages of less than 200VDC
are significantly less than those of Xenon flashtube designs; therefore,
this system represents an advance in safety. Unlike Xenon systems, there
is no plastic eroding ozone produced. The SafeSite® Series Dual L864 /
L865 LED strobe operates from a 100/240VAC 50/60 Hz supply. The
power supply / control box can be located up to 550 ft away from the
light engine, outside of the hazardous area.
Flashhead Weight:
Operating Voltage:
26 lbs
Universal 100/240 VAC 50/60Hz
power factor corrected supply
Candela:
Wattage:
White Day
White Night
Red Night
20,000 cd
2,000 cd
2,000 cd
White Day
White Night
Red Night
90W
35W
25W
Dimensions in Inches [mm]
Power Factor:
>0.9
Certifications & Ratings:
w FAA AC NO: 150/5345-43F
w FAA Engineering Brief No. 67
w UL 844, CSA, C22.2 No. 137-M1981
w Class I Division 2 Groups: A, B, C & D
Ambient Temp:
Temperature Code:
Synchronization:
-40ºF to +131ºF (-40ºC to +55ºC)
T5
Multiple unit sync from single controller
(Operates with other manufacturers of GPS
sync devices)
Compliant to:
w ICAO Annex 14, 4th Edition, July 2004
Order code:
Part Number
Qualified By:
w Intertek ETL
Description
D1RW-B13-008
Class I Div. 2 FAA certified strobe
Features & Benefits:
w Complete performance 5 year warranty
w Shock and vibration resistant
w Patented optic with sharp beam cutoff
w Minimum ground scatter (community friendly light pattern)
w High impact polycarbonate lens
w Specialized lens coating providing superior UV, scratch,
and chemical resistance
w Factory sealed for an IP66 water ingress protection
w All metal rugged mounting base
w Extremely low RF interference
w Light module detachable from base for easy replacement
at end of life
Dialight reserves the right to make changes at any time in order to supply the best product possible.
The most current version of this document will always be available at:
http://www.dialight.com/Assets/Brochures_And_Catalogs/Signaling/MDTFD1RWBX001.pdf
MDTFD1RWBX001_B
www.dialight.com