5秒后页面跳转
CYF0144V33L-133BGXI PDF预览

CYF0144V33L-133BGXI

更新时间: 2024-01-26 23:53:54
品牌 Logo 应用领域
赛普拉斯 - CYPRESS 时钟LTE先进先出芯片内存集成电路
页数 文件大小 规格书
29页 863K
描述
FIFO, 4MX36, 10ns, Synchronous, CMOS, PBGA209, FBGA-209

CYF0144V33L-133BGXI 技术参数

是否Rohs认证: 符合生命周期:Active
包装说明:BGA, BGA209,11X19,40Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.32.00.71
风险等级:5.81最长访问时间:10 ns
其他特性:ALSO REQUIRED 1.8V SUPPLY NOM, ALTERNATE MIN MEMORY WIDTH : 9最大时钟频率 (fCLK):133 MHz
周期时间:7.5 nsJESD-30 代码:R-PBGA-B209
JESD-609代码:e1长度:22 mm
内存密度:150994944 bit内存集成电路类型:OTHER FIFO
内存宽度:36湿度敏感等级:3
功能数量:1端子数量:209
字数:4194304 words字数代码:4000000
工作模式:SYNCHRONOUS最高工作温度:85 °C
最低工作温度:-40 °C组织:4MX36
可输出:YES封装主体材料:PLASTIC/EPOXY
封装代码:BGA封装等效代码:BGA209,11X19,40
封装形状:RECTANGULAR封装形式:GRID ARRAY
并行/串行:PARALLEL峰值回流温度(摄氏度):260
电源:3.3 V认证状态:Not Qualified
座面最大高度:1.96 mm子类别:FIFOs
最大压摆率:0.5 mA最大供电电压 (Vsup):1.575 V
最小供电电压 (Vsup):1.425 V标称供电电压 (Vsup):1.5 V
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子面层:Tin/Silver/Copper (Sn/Ag/Cu)
端子形式:BALL端子节距:1 mm
端子位置:BOTTOM处于峰值回流温度下的最长时间:40
宽度:14 mmBase Number Matches:1

CYF0144V33L-133BGXI 数据手册

 浏览型号CYF0144V33L-133BGXI的Datasheet PDF文件第2页浏览型号CYF0144V33L-133BGXI的Datasheet PDF文件第3页浏览型号CYF0144V33L-133BGXI的Datasheet PDF文件第4页浏览型号CYF0144V33L-133BGXI的Datasheet PDF文件第5页浏览型号CYF0144V33L-133BGXI的Datasheet PDF文件第6页浏览型号CYF0144V33L-133BGXI的Datasheet PDF文件第7页 
PRELIMINARY  
CYF0144V  
144-Mbit Programmable FIFOs  
144-Mbit Programmable FIFOs  
Features  
Functional Description  
Memory organization  
Industry’s largest first in first out (FIFO) memory density:  
144-Mbit  
Selectable memory organization: × 9, × 12, × 16, × 18, × 20,  
× 24, × 32, × 36  
The Cypress programmable FIFO family offers the industry’s  
highest-density programmable FIFO memory device. It has  
independent read and write ports, which can be clocked up to  
133 MHz. User can configure input and output bus sizes. The  
maximum bus size of 36 bits enables a maximum data  
throughput of 4.8 Gbps. The read and write ports can support  
multiple I/O voltage standards. The user-programmable  
registers enable user to configure the device operation as  
desired. The device also offers a simple and easy-to-use  
interface to reduce implementation and debugging efforts,  
improve time-to-market, and reduce engineering costs. This  
makes it an ideal memory choice for a wide range of applications  
including multiprocessor interfaces, video and image  
processing, networking and telecommunications, high-speed  
data acquisition, or any system that needs buffering at very high  
speeds across different clock domains.  
Up to 133-MHz clock operation  
Unidirectional operation  
Independent read and write ports  
Supports simultaneous read and write operations  
Reads and writes operate on independent clocks upto a  
maximum ratio, of two enabling data buffering across clock  
domains.  
Supports multiple I/O voltage standard: low voltage  
complementary metal oxide semiconductor (LVCMOS) 3.3 V  
and 1.8 V voltage standards.  
As implied by the name, the functionality of the FIFO is such that  
the data is read out of the read port in the same sequence in  
which it was written into the write port. The data is sequentially  
written into the FIFO from the write port. If the writes and inputs  
are enabled, the data on the write port gets written into the device  
at the rising edge of the write clock. Enabling the reads and  
outputs fetches data on the read port at every rising edge of the  
read clock. Both reads and writes can occur simultaneously at  
different speeds provided the ratio between read and write clock  
is in the range of 0.5 to 2. Appropriate flags are set whenever the  
FIFO is empty, full, half-full, almost-full, or almost-empty.  
Input and output enable control for write mask and read skip  
operations  
Mark and retransmit: resets read pointer to user marked  
position  
Empty, full, half-full, and programmable almost-empty and  
almost-full status flags with preselected offsets  
Flow-through mailbox register to send data from input to output  
port, bypassing the FIFO sequence  
Configure programmable flags and registers through serial or  
parallel modes  
The device also supports mark and retransmit of data, and a  
flow-through mailbox register.  
All descriptions are given assuming the device CYF0144V is  
operated in × 36 mode. They hold good for all port sizes × 9,  
× 12, × 16, × 18, × 20, × 24 and × 32 unless otherwise specified.  
The only difference will be in the input and output bus width.  
Table 1 on page 8 shows the part of bus with valid data from  
D[35:0] and Q[35:0] in × 9, × 12, × 16, × 18, × 20, × 24, × 32 and  
× 36 modes.  
Separate serial clock (SCLK) input for serial programming  
Master reset to clear entire FIFO  
Partial reset to clear data but retain programmable settings  
Joint test action group (JTAG) port provided for boundary scan  
function  
Industrial temperature range: –40 °C to +85 °C  
Cypress Semiconductor Corporation  
Document Number: 001-70361 Rev. *A  
198 Champion Court  
San Jose, CA 95134-1709  
408-943-2600  
Revised November 7, 2012  

与CYF0144V33L-133BGXI相关器件

型号 品牌 获取价格 描述 数据表
CYF1018V CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1018V_12 CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs
CYF1018V18L-100BGXI CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1018V33L-100BGXI CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1036V CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1036V18L-100BGXI CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1036V33L-100BGXI CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1072V CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1072V18L-100BGXI CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports
CYF1072V33L-100BGXI CYPRESS

获取价格

18/36/72-Mbit Programmable 2-Queue FIFOs Independent read and write ports