CY2SSTV855
Differential Clock Buffer/Driver
Features
Functional Description
• Phase-locked loop (PLL) clock distribution for Double
The CY2SSTV855 is a high-performance, very-low-skew,
very-low-jitter zero-delay buffer that distributes a differential
clock input pair (SSTL_2) to four differential (SSTL_2) pairs of
clock outputs and one differential pair of feedback clock
outputs. In support of low power requirements, when
power-down is HIGH, the outputs switch in phase and
frequency with the input clock. When power-down is LOW, all
outputs are disabled to a high-impedance state and the PLL is
shut down.
The device supports a low-frequency power-down mode.
When the input is < 20 MHz, the PLL is disabled and the
outputs are put in the Hi-Z state. When the input frequency is
> 20 MHz, the PLL and outputs are enabled.
Data Rate Synchronous DRAM applications
• 1:5 differential outputs
• External feedback pins (FBINT, FBINC) are used to
synchronize the outputs to the clock input
• SSCG: Spread Aware™ for electromagnetic
interference (EMI) reduction
• 28-pin TSSOP package
• Conform to JEDEC DDR specifications
When AVDD is tied to ground, the PLL is turned off and
bypassed with the input reference clock gated to the outputs.
The Cypress CY2SSTV855 is Spread Aware and supports
tracking of Spread Spectrum clock inputs to reduce EMI
Block Diagram
Pin Configuration
GND
YC0
YT0
VDDQ
GND
CLKINT
CLKINC
VDDQ
AVDD
AGND
VDDQ
YT1
YC1
GND
YC3
YT3
1
28
27
26
25
24
23
22
21
20
19
18
17
16
15
2
YT0
YC0
3
PWRDWN
AVDD
Powerdown
and test
logic
VDDQ
PWRDWN
FBINT
FBINC
VDDQ
FBOUTC
FBOUTT
VDDQ
YT2
4
YT1
YC1
5
6
7
8
YT2
YC2
9
CLKINT
CLKINC
10
11
12
13
14
PLL
YT3
YC3
FBINT
FBINC
YC2
GND
GND
FBOUTT
FBOUTC
28 pin TSSOP
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose, CA 95134
•
408-943-2600
Document #: 38-07459 Rev. *D
Revised May 07, 2004