5秒后页面跳转
捷配首页

Datasheet > 逻辑 > 时钟驱动器> CY2308ZXC-1H
CY2308ZXC-1H PDF预览

CY2308ZXC-1H

更新时间： 2024-11-19 22:25:15
品牌 Logo 应用领域
赛普拉斯 - CYPRESS /
页数 文件大小 规格书
14页 203K
描述
3.3V Zero Delay Buffer

阅读下载

中文翻译

获取价格

CY2308ZXC-1H 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active零件包装代码：TSSOP
包装说明：TSSOP, TSSOP16,.25针数：16
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.31.00.01Factory Lead Time：1 week
风险等级：1.35系列：2308
输入调节：STANDARDJESD-30 代码：R-PDSO-G16
JESD-609代码：e3长度：5 mm
逻辑集成电路类型：PLL BASED CLOCK DRIVER最大I（ol）：0.012 A
湿度敏感等级：3功能数量：1
反相输出次数：端子数量：16
实输出次数：8最高工作温度：70 °C
最低工作温度：输出特性：3-STATE
封装主体材料：PLASTIC/EPOXY封装代码：TSSOP
封装等效代码：TSSOP16,.25封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度（摄氏度）：260
电源：3.3 V认证状态：Not Qualified
Same Edge Skew-Max（tskwd）：0.2 ns座面最大高度：1.1 mm
子类别：Clock Drivers最大供电电压 (Vsup)：3.6 V
最小供电电压 (Vsup)：3 V标称供电电压 (Vsup)：3.3 V
表面贴装：YES技术：CMOS
温度等级：COMMERCIAL端子面层：Matte Tin (Sn)
端子形式：GULL WING端子节距：0.65 mm
端子位置：DUAL处于峰值回流温度下的最长时间：30
宽度：4.4 mm最小 fmax：133.3 MHz
Base Number Matches：1

CY2308ZXC-1H 数据手册

 浏览型号CY2308ZXC-1H的Datasheet PDF文件第2页浏览型号CY2308ZXC-1H的Datasheet PDF文件第3页浏览型号CY2308ZXC-1H的Datasheet PDF文件第4页浏览型号CY2308ZXC-1H的Datasheet PDF文件第5页浏览型号CY2308ZXC-1H的Datasheet PDF文件第6页浏览型号CY2308ZXC-1H的Datasheet PDF文件第7页 
1CY2308  
CY2308  
3.3V Zero Delay Buffer  
The CY2308 has two banks of four outputs each, which can  
be controlled by the Select inputs as shown in the table “Select  
Input Decoding.” If all output clocks are not required, Bank B  
can be three-stated. The select inputs also allow the input  
clock to be directly applied to the output for chip and system  
testing purposes.  
Features  
• Zero input-output propagation delay, adjustable by  
capacitive load on FBK input  
• Multiple configurations, see “Available CY2308  
Configurations” table  
• Multiple low-skew outputs  
— Output-output skew less than 200 ps  
— Device-device skew less than 700 ps  
The CY2308 PLL enters a power-down state when there are  
no rising edges on the REF input. In this mode, all outputs are  
three-stated and the PLL is turned off, resulting in less than  
50 µA of current draw. The PLL shuts down in two additional  
cases as shown in the “Select Input Decoding” table.  
Multiple CY2308 devices can accept the same input clock and  
distribute it in a system. In this case, the skew between the  
outputs of two devices is guaranteed to be less than 700 ps.  
The CY2308 is available in five different configurations, as  
shown in the “Available CY2308 Configurations” table on page  
2. The CY2308–1 is the base part, where the output  
frequencies equal the reference if there is no counter in the  
feedback path. The CY2308–1H is the high-drive version of  
the –1, and rise and fall times on this device are much faster.  
— Two banks of four outputs, three-stateable by two  
select inputs  
• 10-MHz to 133-MHz operating range  
• Low jitter, less than 200 ps cycle-cycle (–1, –1H, –4, –5H)  
• Space-saving 16-pin 150-mil SOIC package or 16-pin  
TSSOP  
• 3.3V operation  
• Industrial Temperature available  
The CY2308–2 allows the user to obtain 2X and 1X  
frequencies on each output bank. The exact configuration and  
output frequencies depends on which output drives the  
feedback pin. The CY2308–3 allows the user to obtain 4X and  
2X frequencies on the outputs.  
The CY2308–4 enables the user to obtain 2X clocks on all  
outputs. Thus, the part is extremely versatile, and can be used  
in a variety of applications.  
Functional Description  
The CY2308 is a 3.3V Zero Delay Buffer designed to distribute  
high-speed clocks in PC, workstation, datacom, telecom, and  
other high-performance applications.  
The part has an on-chip PLL which locks to an input clock  
presented on the REF pin. The PLL feedback is required to be  
driven into the FBK pin, and can be obtained from one of the  
outputs. The input-to-output skew is guaranteed to be less  
than 350 ps, and output-to-output skew is guaranteed to be  
less than 200 ps.  
The CY2308–5H is a high-drive version with REF/2 on both  
banks.  
Pin Configuration  
Block Diagram  
/2  
FBK  
PLL  
SOIC  
REF  
MUX  
Top View  
/2  
CLKA1  
CLKA2  
CLKA3  
CLKA4  
1
2
3
4
5
6
7
8
16  
REF  
CLKA1  
FBK  
15  
14  
13  
12  
11  
10  
9
Extra Divider (–3, –4)  
Extra Divider (–5H)  
CLKA4  
CLKA3  
VDD  
CLKA2  
VDD  
S2  
GND  
GND  
CLKB1  
Select Input  
CLKB4  
CLKB3  
S1  
Decoding  
S1  
/2  
CLKB2  
CLKB1  
CLKB2  
CLKB3  
CLKB4  
S2  
Extra Divider (–2, –3)  
Cypress Semiconductor Corporation  
•
3901 North First Street  
•
San Jose  
•
CA 95134  
•
408-943-2600  
Document #: 38-07146 Rev. *C  
Revised June 16, 2004  
1234567...14

中文翻译

下载PDF

CY2308ZXC-1H 替代型号

型号 品牌 替代类型 描述 数据表
CY2308ZXC-1HT CYPRESS

完全替代

 3.3V Zero Delay Buffer
CY2308SXC-1H CYPRESS

完全替代

 3.3V Zero Delay Buffer
CY2308ZXI-1H CYPRESS

类似代替

 3.3V Zero Delay Buffer

与CY2308ZXC-1H相关器件

型号 品牌 获取价格 描述 数据表
CY2308ZXC-1HT CYPRESS

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXC-1HT INFINEON

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXC-5H CYPRESS

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXI-1H CYPRESS

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXI-1H INFINEON

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXI-1HT CYPRESS

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXI-1HT INFINEON

获取价格

 		3.3V Zero Delay Buffer
CY2308ZXI-5H CYPRESS

获取价格

 		3.3V Zero Delay Buffer
CY2309 CYPRESS

获取价格

 		CY2305 and CY2309 as PCI and SDRAM Buffers
CY2309C CYPRESS

获取价格

 		Zero Delay Buffers

与CY2308ZXC-1H相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证