CXM-11 Product Datasheet
(Part #) Product Datasheet
Handling Notes
Luminus products are designed for robust performance in general lighting application. However, care must be taken when handling and
assembling the LEDs into their fixtures. To avoid damaging Luminus COBs please follow these guidelines.
The following is an overview of the application notes detailing some of the practices to follow when working with these devices. More
detailed information is available on the Luminus web site at www.luminus.com.
General Handling
Devices are made to be lifted or carried with tweezers on two adjacent corners opposite the contact pads. At no time should the devices
be handled by or should anything come in contact with the light emitting surface (LES) area. This area includes the yellow colored
circular area and the ring surrounding it. There are electrical connections under the LES which if damaged will cause the device to fail. In
addition, the ring frame itself should not be used for moving, lifting or carrying the device. Also do not attach any optics or mechanical
holders to the ring as it is not capable to handle the mechanical stress.
Storage Condition
Please follow the conditions below.
Temperature 5~30 ºC, relative humidity less than 60%.
Before opened
Note: before opened LED should be used within a year
Temperature 5~30ºC, relative humidity less than 60%. Please apply soldering within one week.
After opened
After opened LED should be kept in an aluminum moisture proof bag with a moisture absorbent material
Avoid exposing to air with corrosive gas. If exposed, electrode surface would be damaged, which may affect
Avoid
soldering. Furthermore, if the device is stored in an environment which contain elements that could volatize resin
corrosive gas
material, then the volatized resin particles may stick to electrodes, which may result in connection failures.
Static Electricity
Luminus COBs are electronic devices which can be damaged by electrostatic discharge (ESD). Please use appropriate measures to assure
the devices do not experience ESD during their handling and or storage. ESD protection guidelines should be used at all time when
working with Luminus COBs.
Storage
Luminus products are delivered in ESD shielded bags and should be stored in these bags until used
Transporting
When transporting the devices from one assembly area to another, ESD shielded carts and carriers should be used
Individuals handling Luminus COBs during assembly should be trained in ESD protection practices. Assemblers
should maintain constant conductive contact with a path to ground by means of a wrist strap, ankle straps, mat or
other ESD protection system
Assembly
10
Luminus Devices, Inc. • www.luminus.com
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-003002 Rev 02
© 2020 Luminus Devices, Inc. - All Rights Reserved