CWR26
www.vishay.com
Vishay
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT™ Conformal Coated, Low ESR,
Military, MIL-PRF-55365/13 Qualified
FEATURES
• Weibull failure rates B, C, T
• Low ESR
Available
Available
• Tape and reel available per EIA 481
• Termination finishes available: gold plate,
solder plated, solder fused, and hot solder dipped
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40211
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 10 μF to 100 μF
Capacitance Tolerance: 5 ꢀ, 10 ꢀ, 20 ꢀ
Voltage Rating: 15 VDC to 35 VDC
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Moisture Sensitivity Level 1
ORDERING INFORMATION
CWR26
H
B
106
K
B
F
A
/TR
(2)
TYPE
VOLTAGE
TERMINATION
FINISH
CAPACITANCE
CAPACITANCE
TOLERANCE
FAILURE RATE
ꢀ/1000 h
CASE
CODE
SURGE CURRENT
PACKAGING
H = 15 V
K = 25 V
M = 35 V
B = gold
C = hot solder
dipped
H = solder
plated
K = solder
fused
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
J = 5 ꢀ
K = 10 ꢀ
M = 20 ꢀ
B = 0.1
C = 0.01
T = 0.01 (1)
F
G
H
A = 10 cycles at +25 °C
B = 10 cycles
at -55 °C and +85 °C
C = 10 cycles
at -55 °C and +85 °C
(before Weibull grading)
Z = no surge current
Blank = bulk,
plastic tray
/FA = waffle pack
/PR = 100 pcs
reel
/HR = half reel
/TR = full reel
Notes
(1)
T level requires surge current option “C”. Capacitors are recommended for “space applications”. Shipped in tape and reel / or waffle
packaging only
(2)
Individual reels may include capacitors of two date codes that will be separated by an empty pocket.
Reel labels will show both date codes. The date code on the top (DC1) is the inner tape layers or first capacitors reeled
DIMENSIONS in inches [millimeters]
-
+
Weld and
dimple
projection
identifies
anode (+)
terminal
W
H
T1
T2 (max.)
L
P
P
CASE CODE
L
W
H
P
T1
T2 (max.)
0.220 0.015
[5.59 0.38]
0.135 0.015
[3.43 0.38]
0.070 0.015
[1.78 0.38]
0.030 0.005
[0.76 0.13]
0.005
[0.13]
0.015
[0.38]
F
0.265 0.015
[6.73 0.38]
0.110 0.015
[2.79 0.38]
0.110 0.015
[2.79 0.38]
0.050 0.005
[1.27 0.13]
0.005
[0.13]
0.015
[0.38]
G
H
0.285 0.015
[7.24 0.38]
0.150 0.015
[3.81 0.38]
0.110 0.015
[2.79 0.38]
0.050 0.005
[1.27 0.13]
0.005
[0.13]
0.015
[0.38]
Note
When solder coated terminations are required, add 0.015" [0.38 mm] to termination dimension tolerance
•
Revision: 17-Jul-2018
Document Number: 40163
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000