CS8311
Micropower 10 V, 100 mA
Low Dropout Linear
Regulator with RESET
and ENABLE
http://onsemi.com
The CS8311 is a precision 10 V micropower voltage regulator with
very low quiescent current (100 µA typ at 100 µA load). The 10 V
output is accurate within ±4.0% and supplies 100 mA of load current
with a typical dropout voltage of only 400 mV. Microprocessor control
logic includes an ENABLE input and an active RESET.
SO–8
D SUFFIX
8
CASE 751
1
The active RESET circuit includes hysteresis, and operates
correctly at an output voltage as low as 1.0 V. The RESET function is
activated during the power up sequence or during normal operation if
the output voltage drops outside the regulation limits by more than
1.0 V typ. The logic level compatible ENABLE input allows the user to
put the regulator into a shutdown mode where it draws only 20 µA
typical of quiescent current.
The regulator is protected against reverse battery, short circuit, over
voltage, and thermal overload conditions. The device can withstand
load dump transients making it suitable for use in automotive
environments.
PIN CONNECTIONS AND
MARKING DIAGRAM
1
8
V
OUT
V
IN
V
Sense
OUT
NC
ENABLE
GND
NC
RESET
A
= Assembly Location
Features
• 10 V ±4.0% Output
• Low 100 µA Quiescent Current
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
• Active RESET
ORDERING INFORMATION
• ENABLE Input for ON/OFF and Active/Sleep Mode Control
• 100 mA Output Current Capability
• Fault Protection
– +60 V Peak Transient Voltage
– –15 V Reverse Voltage Short Circuit Thermal Overload
• Low Reverse Current (Output to Input)
Device
Package
SO–8
Shipping
95 Units/Rail
CS8311YD8
CS8311YDR8
SO–8
2500 Tape & Reel
Semiconductor Components Industries, LLC, 2001
1
Publication Order Number:
April, 2001 – Rev. 5
CS8311/D