CRCW-HP e3
Vishay Draloric
www.vishay.com
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
• Excellent pulse load capability
• Enhanced power rating
• Double side printed resistor element
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The pulse proof, high power thick film chip resistors series
is the perfect choice for most fields of power measurement
electronics where reliability, stability, high power rating and
excellent pulse load performance are of major concern.
Typical applications include battery management systems
in automotive appliances.
APPLICATIONS
• Automotive
• Industrial
TECHNICAL SPECIFICATIONS
CRCW0402- CRCW0603- CRCW0805- CRCW1206- CRCW1210- CRCW1218- CRCW2010- CRCW2512-
DESCRIPTION
HP e3
HP e3
HP e3
HP e3
HP e3
HP e3
HP e3
HP e3
Imperial size
0402
0603
0805
1206
1210
1218
2010
2512
Metric size code
RR1005M
RR1608M
RR2012M
RR3216M
RR3225M
RR3246M
RR5025M
RR6332M
Resistance range
Resistance tolerance
Temperature coefficient
1 to 1 M jumper (0)
5 %; 1 %; 0.5 %
200 ppm/K; 100 ppm/K
(1)
Rated dissipation, P70
Operating voltage,
Umax. ACRMS/DC
0.2 W (2)
50 V
0.25 W
75 V
0.5 W
150 V
0.75 W (3)
0.75 W
1.5 W
200 V
1.0 W
400 V
1.5 W
500 V
200 V
200 V
Permissible film
temperature, F max.
155 °C
(1)
Operating temperature
range
-55 °C to +155 °C
Max. resistance change
at P70 for resistance
range, |R/R| after:
1000 h
8000 h
2.0 %
4.0 %
Permissible voltage
against ambient
(insulation):
1 min, Uins
75 V
100 V
200 V
300 V
300 V
300 V
300 V
300 V
Notes
•
Marking: See document “Surface Mount Resistor Marking” (www.vishay.com/doc?20020).
Please refer to APPLICATION INFORMATION below.
CRCW0402-HP resistors feature a single side printed resistive layer only.
Specified power rating requires a thermal resistance of Rth = 110 K/W.
(1)
(2)
(3)
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 16-Sep-16
Document Number: 20043
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000