CRCW-HP e3
Vishay
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
• Excellent pulse load capability
• Enhanced power rating
• Double side printed resistor element
• Protective overglaze
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• Compliant to RoHS directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
• AEC-Q200 qualified, rev. C compliant
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
LIMITING
POWER RATING
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
Ω
ELEMENT
VOLTAGE
MAX. V
TOLERANCE
%
MODEL
P70
E-SERIES
INCH METRIC
W
100
200
1
5
E24 + E96
E24
0.125 (1)
50
1R to 1M
1R to 1M
1R to 1M
1R to 1M
1R to 1M
1R to 1M
1R to 1M
1R to 1M
CRCW0402-HP e3
CRCW0603-HP e3
CRCW0805-HP e3
CRCW1206-HP e3
CRCW1210-HP e3
CRCW1218-HP e3
CRCW2010-HP e3
CRCW2512-HP e3
0402 RR1005
0603 RR1608
0805 RR2012
1206 RR3216
1210 RR3225
1218 RR3246
2010 RR5025
2512 RR6332
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 3 A
100
200
1
5
E24 + E96
E24
0.25
75
Zero-Ohm-Resistor: Rmax. = 0.008 Ω, Imax. = 5 A
100
200
1
5
E24 + E96
E24
0.33
150
Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 6 A
100
200
1
5
E24 + E96
E24
0.5
200
Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 10 A
100
200
1
5
E24 + E96
E24
0.75
200
Zero-Ohm-Resistor: Rmax. = 0.004 Ω, Imax. = 12 A
100
200
1
5
E24 + E96
E24
1.5
200
Zero-Ohm-Resistor: Rmax. = 0.004 Ω, Imax. = 20 A
100
200
1
5
E24 + E96
E24
1.0
400
Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 12 A
100
1
5
E24 + E96
E24
1.5
500
200
Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 16 A
Notes
(1) CRCW0402-HP resistors feature a single side printed resistive layer only
•
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
Marking: See document “Surface Mount Resistor Marking” (document number 20020)
•
•
Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
CRCW
CRCW
CRCW
CRCW
CRCW
CRCW
CRCW
CRCW
PARAMETER
UNIT
0402-HP 0603-HP 0805-HP 1206-HP 1210-HP 1218-HP 2010-HP 2512-HP
(1)
Rated Dissipation P70
W
V
V
0.125
50
> 75
0.25
75
> 100
0.33
150
> 200
0.5
200
0.75
200
> 300
1.5
200
> 300
1.0
400
> 300
1.5
500
> 300
Limiting Element Voltage Umax. AC/DC
Insulation Voltage Uins. (1 min)
Insulation Resistance
> 300
Ω
> 109
Category Temperature Range
Weight
°C
mg
- 55 to + 155
10 18
0.65
2
5.5
31
25.5
42
Note
(1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
Document Number: 20043
Revision: 26-Mar-10
For technical questions, contact: thickfilmchip@vishay.com
www.vishay.com
171