CRA04S
Vishay
Thick Film Resistor Array
FEATURES
• Convex terminal array with square corners
• Wide ohmic ramge: 10R to 1M0
• 4 or 8 terminal package with isolated resistors
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
The CRA04S thick film resistor array is constructed on a high
grade ceramic body with convex terminations. A small
package enables the design of high density circuits. The
single component reduces board space, component counts,
and assembly costs.
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING LIMITING ELEMENT TEMPERATURE
RESISTANCE
RANGE
Ω
TOLERANCE
%
MODEL
CIRCUIT
P70 °C
VOLTAGE MAX.
COEFFICIENT
ppm/K
E-SERIES
W
V≅
100
200
1
24 + 96
24
0.063
50
10R - 1M0
CRA04S
03
2ꢀ
5
Zero-Ohm-Resistor: Rmax. ≤ 50 mΩ, Imax. = 1 A
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRA04S
0.063
50
Rated Dissipation at 70 °C (2)
Limiting Element Voltage (1)
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
W per element
V≅
Vdc/ac peak
°C
100
- 55 to + 155
> 109
Ω
Notes
(1)
(2)
Rated voltage: P × R
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rate dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESPRIPTION
PART NUMBER: CRA04S08347K0JTD (3)
C
R
A
0
4
S
0
8
3
4
7
K
0
J
T
D
MODEL
TERMINAL STYLE
PIN
CIRCUIT
VALUE
TOLERANCE
PACKAGING (4)
SPECIAL
CRA04
S
04
08
3 = 03
R = Decimal
K = Thousand
M = Million
F = 1 %
G = 2 %
TD
TC
PZ
Up to 2 digits
J = 5 %
0000 = 0 Ω Jumper
Z = 0 Ω Jumper
PRODUCT DESCRIPTION: CRA04S 08 03 473 J RT7 e3
CRA04S
08
03
473
J
RT7
e3
MODEL
CRA04S
TERMINAL COUNT CIRCUIT TYPE
RESISTANCE VALUE
TOLERANCE
PACKAGING (4) LEAD (Pb)-FREE
04
08
03
473 = 47 kΩ
4702 = 47 kΩ
10R0 = 10 Ω
F = 1 %
G = 2 %
RT7
RT6
PZ
e3 = Pure tin
Termination finish
J = 5 %
100 = 10 Ω
Z = 0 Ω Jumper
000 = 0 Ω Jumper
First two digits (3 for 1 %)
are significant. Last digit
is the multiplier.
Notes
(3)
Preferred way for ordering products is by use of the PART NUMBER
(4)
Please refer to the table PACKAGING, see next page
www.vishay.com
248
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
Document Number: 31043
Revision: 13-Oct-08