Loop-Powered AC Current Transmitter
The CR4200 Series, Current Transmitters produce a calibrated
4-20 mADC signal that is proportional to the average RMS
input AC current. Designed for multi-point current sensing,
these devices provide excellent features in a value package.
The output signal is generated from a user supplied 24 VDC
power supply within the output current loop.
DIN RAIL / PANEL MOUNT, AVERAGE RMS
Applications
Multi-point current sensing and control panels
Remote current sensing
Monitor motor faults
Monitor heating elements
Monitor lighting elements
CR4220
Single Element - .79” Window
0.5 to 50 AAC Input Range
Features
Relatively low cost
35mm DIN rail or panel mount
High Accuracy
Easy wiring
C
Interfaces with most commercially available instrumentation
Connection diagram printed on case
Regulatory Agencies
Recognized to meet UL 61010B-1
Constructed to meet CAN/CSA-C22.2, No. 61010-1-2004
Meets requirement of IEC 61010-1 and BS EN 61010-1
CR4260
Two Element - .26” Window
0.5 to 30 AAC Input Range
E199795
All single phase current transducers are
available in split core design. Simply put an
“S” at the end of the prefix*
I.E. CR4220S-10
CR Magnetics has a wide selection of current transformers to
extend the range of any part. Contact factory for more
information.
* Not UL Recognized
Add suffix for input range
5
10
15
20
25
30
40
50
-
-
-
-
-
-
-
-
0- 5 AAC
0-10 AAC
0-15 AAC
0-20 AAC
0-25 AAC
0-30 AAC
0-40 AAC
0-50 AAC
PART NUMBERS
CR4220(S)
CR4260
Single element with 4 - 20 mADC output (split core design)
-
-
Two element with 4 - 20 mADC output*
Two element transducers are only available in ranges of 0.5 to 30 AAC
*
Ranges available up to and
including 600 AAC
The Professional
Energy Monitoring
Company
3500 Scarlet Oak Blvd. St. Louis MO USA 63122 V: 636-343-8518 F: 636-343-5119
Web: http://www.crmagnetics.com E-mail: sales@crmagnetics.com
M
N TI
36
ISO 9001:2008 Quality Management System