CPC1967
i4-PAC™ Power Relay
Characteristics
Description
®
Clare and IXYS have combined to bring OptoMOS
technology, reliability and compact size to a new family
of high power Solid State Relays.
Parameter
Rating
Units
VP
Blocking Voltage
400
Load Current, TA=25°C:
As part of this family, the CPC1967 single-pole
normally open (1-Form-A) Solid State Power Relay is
With 5°C/W Heat Sink
No Heat Sink
3.35
1.35
0.85
A
rms
rated for up to 3.35A
continuous load current with a
rms
On-Resistance
Ω
5°C/W heat sink.
R
0.35
°C/W
θJC
The CPC1967 employs optically coupled MOSFET
technology to provide 2500V of input to output
rms
Features
isolation. The output, constructed with efficient
MOSFET switches and photovoltaic die, uses Clare’s
patented OptoMOS architecture while the input, a
highly efficient GaAlAs infrared LED, provides the
optically coupled control. The combination of low
on-resistance and high load current handling
capability makes this relay suitable for a variety of high
performance switching applications.
• 3.35A
Load Current with 5°C/W Heat Sink
rms
• Low 0.85Ω On-Resistance
• 400V Blocking Voltage
P
• 2500V
Input/Output Isolation
rms
• Low Thermal Resistance (0.35 °C/W)
• Electrically Non-conductive Thermal Pad for Heat
Sink Applications
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
The unique i4-PAC package pioneered by IXYS
enables Solid State Relays to achieve the highest load
current and power ratings. This package features a
unique IXYS process where the silicon chips are soft
soldered onto the Direct Copper Bond (DCB)
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls / Motor Control
• Robotics
substrate instead of the traditional copper leadframe.
The DCB ceramic, the same substrate used in high
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
power modules, not only provides 2500V
but also very low thermal resistance (0.35 °C/W).
isolation,
rms
• Data Acquisition
• Electronic Switching
Ordering Information
• I/O Subsystems
Part
Description
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
CPC1967J
i4-PAC Package (25 per tube)
Switching Characteristics
Approvals
• UL 508 Recognized Component: File E69938
Form-A
Pin Configuration
IF
90%
10%
ILOAD
t
t
on
off
RoHS
2002/95/EC
e
3
DS-CPC1967 - R05
www.clare.com
1