August 2003
COP8SBR9/COP8SCR9/COP8SDR9
8-Bit CMOS Flash Based Microcontroller with 32k
Memory, Virtual EEPROM and Brownout
This single-chip CMOS device is suited for applications re-
quiring a full featured, in-system reprogrammable controller
with large memory and low EMI. The same device is used for
development, pre-production and volume production with a
range of COP8 software and hardware development tools.
1.0 General Description
The COP8SBR9/SCR9/SDR9 Flash based microcontrollers
™
are highly integrated COP8 Feature core devices, with 32k
Flash memory and advanced features including Virtual EE-
PROM, High Speed Timers, USART, and Brownout Reset.
Devices included in this datasheet:
Flash Program
RAM
Brownout
Voltage
I/O
Pins
Device
Memory
(bytes)
Packages
Temperature
(bytes)
44 LLP,
37,39,49,
59
COP8SBR9
COP8SCR9
COP8SDR9
32k
32k
32k
1k
2.7V to 2.9V
44/68 PLCC,
48/56 TSSOP
44 LLP,
−40˚C to +85˚C
37,39,49,
59
−40˚C to +85˚C
−40˚C to +125˚C
1k
1k
4.17V to 4.5V
No Brownout
44/68 PLCC,
48/56 TSSOP
44 LLP,
37,39,49,
59
−40˚C to +85˚C
−40˚C to +125˚C
44/68 PLCC,
48/56 TSSOP
n Thirteen multi-source vectored interrupts servicing:
— External Interrupt
— USART (2)
2.0 Features
KEY FEATURES
n 32 kbytes Flash Program Memory with Security Feature
n Virtual EEPROM using Flash Program Memory
n 1 kbyte volatile RAM
n USART with on chip baud generator
n 2.7V–5.5V In-System Programmability of Flash
n High endurance - 100k Read/Write Cycles
n Superior data retention - 100 years
n Dual Clock Operation with HALT/IDLE Power Save
Modes
— Idle Timer T0
— Three Timers (each with 2 interrupts)
— MICROWIRE/PLUS Serial peripheral interface
— Multi-Input Wake-Up
— Software Trap
n Idle Timer with programmable interrupt interval
n 8-bit Stack Pointer SP (stack in RAM)
n Two 8-bit Register Indirect Data Memory Pointers
n True bit manipulation
n WATCHDOG and Clock Monitor logic
n Software selectable I/O options
— TRI-STATE® Output/High Impedance Input
— Push-Pull Output
n Three 16-bit timers:
— Timers T2 and T3 can operate at high speed (50 ns
resolution)
— Processor Independent PWM mode
— External Event counter mode
— Weak Pull Up Input
n Schmitt trigger inputs on I/O ports
n High Current I/Os
— Input Capture mode
n Brown-out Reset (COP8SBR9/SCR9)
n Temperature range: –40˚C to +85˚C and –40˚C to
+125˚C (COP8SCR9/SDR9)
n Packaging: 44 and 68 PLCC, 44 LLP, 48 and 56 TSSOP
n True In-System, Real time emulation and debug offered
by MetaLink’s Development Systemstools available
OTHER FEATURES
n Single supply operation: 2.7V–5.5V
n Quiet Design (low radiated emissions)
n Multi-Input Wake-up with optional interrupts
n MICROWIRE/PLUS (Serial Peripheral Interface
Compatible)
n Clock Doubler for 20 MHz operation from 10 MHz
Oscillator, with 0.5 µs Instruction Cycle
™
COP8 is a trademark of National Semiconductor Corporation.
© 2003 National Semiconductor Corporation
DS101389
www.national.com