PRELIMINARY
March 2004
COP8SBE9/SCE9
8-Bit CMOS Flash Microcontroller with 8k Memory,
Virtual EEPROM and Brownout Reset
single-chip CMOS device is suited for applications requiring
1.0 General Description
a full featured, in-system reprogrammable controller with
The COP8SBE9/SCE9 Flash microcontrollers are highly in-
large memory and low EMI. The same device is used for
™
tegrated COP8
Feature core devices, with 8k Flash
development, pre-production and volume production with a
range of COP8 software and hardware development tools.
memory and advanced features including Virtual EEPROM,
High Speed Timers, USART, and Brownout Reset. This
Devices included in this datasheet:
Max Input
I/O
Flash Program
Memory (bytes) (bytes)
RAM
Brownout
Voltage
Device
Clock
Packages
Temperature
Pins
Frequency
44 LLP, 44PLCC,
48 TSSOP
COP8SBE9
COP8SCE9
8k
8k
256
256
2.7V to 2.9V
4.17V to 4.5V
3.33 MHz
10 MHz
37,39
0˚C to +70˚C
0˚C to +70˚C
−40˚C to
44 LLP, 44PLCC,
48 TSSOP
37,39
+125˚C
n MICROWIRE/PLUS (Serial Peripheral Interface
Compatible)
n Clock Doubler
— 20 MHz operation from 10 MHz Oscillator
(COP8SCE9) with 0.5 µs Instruction Cycle
— 6.67 MHz operation from 3.33 MHz Oscillator
(COP8SBE9) with 1.5 µs Instruction Cycle
n Eleven multi-source vectored interrupts servicing:
— External Interrupt
— USART (2)
— Idle Timer T0
— Two Timers (each with 2 interrupts)
— MICROWIRE/PLUS Serial peripheral interface
— Multi-Input Wake-up
2.0 Features
KEY FEATURES
n 8k bytes Flash Program Memory with Security Feature
n Virtual EEPROM using Flash Program Memory
n 256byte volatile RAM
n USART with onchip baud generator
n 2.7V – 5.5V In-System Programmability of Flash
n High endurance -100k Read/Write Cycles
n Superior Data Retention - 100 years
n Dual Clock Operation with HALT/IDLE Power Save
Modes
n Two 16-bit timers:
— Timer T2 can operate at high speed (50 ns
resolution)
— Processor Independent PWM mode
— External Event counter mode
— Input Capture mode
— Software Trap
n Idle Timer with programmable interrupt interval
n 8-bit Stack Pointer SP (stack in RAM)
n Two 8-bit Register Indirect Data Memory Pointers
n True bit manipulation
n Brown-out Reset
n WATCHDOG and Clock Monitor logic
n Software selectable I/O options
— TRI-STATE Output/High Impedance Input
— Push-Pull Output
n High Current I/Os
— B0 – B3: 10 mA 0.3V
— All others: 10 mA 1.0V
@
@
OTHER FEATURES
n Single supply operation:
— 2.7V–5.5V (0˚C to +70˚C)
— 4.5V–5.5V (−40˚C to +125˚C)
n Quiet Design (low radiated emissions)
n Multi-Input Wake-up with optional interrupts
— Weak Pull Up Input
n Schmitt trigger inputs on I/O ports
n Temperature range: 0˚C to +70˚C and –40˚C to +125˚C
(COP8SCE9)
n Packaging: 44 PLCC, 44 LLP and 48 TSSOP
™
COP8 is a trademark of National Semiconductor Corporation.
© 2004 National Semiconductor Corporation
DS200327
www.national.com