THROUGH HOLE CLOCK OSCILLATORS - 3 STATE HCMOS COMPATIBLE
SERIES CO15 AND CO19
FEATURES
WIDE FREQUENCY RANGE
EXCELLENT FOR 16 AND 32 BIT MPU’S
3-STATE FUNCTION
SPECIFICATIONS
SERIES
CO15
C019
PACKAGE
14 PIN DIP
8 PIN DIP
FREQUENCY RANGE
500 KHz TO 100.00 MHz
500 KHz TO 100.00 MHz
CO15100 : ±100 PPM
CO15050 : ±50 PPM
CO15025 : ±25 PPM
CO19100 : ±100 PPM
CO19050 : ±50 PPM
CO19025 : ±25 PPM
FREQUENCY STABILITY†
0° C TO + 70° C STANDARD
-40° CTO + 85° C EXTENDED
0° C TO + 70° C STANDARD
-40° CTO + 85° C EXTENDED
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
VOLTAGE
-55° C TO +125° C
+5 VDC ±0.5 VDC
-55° C TO +125° C
+5 VDC ±0.5 VDC
INPUT
CURRENT
60 mA MAX
60 mA MAX
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
SYMMETRY
10 ns MAX - 500 KHz TO 25.00 MHz
6ns MAX - 25.10 MHz TO 70.00 MHz 6ns MAX - 25.10 MHz TO 70.00 MHz
4 ns MAX - 70.1 MHz TO 100.00 MHz 4 ns MAX - 70.1 MHz TO 100.00 MHz
10 ns MAX - 500 KHz TO 25.00 MHz
RISE AND FALL TIME
(0.5 - 4.5 VDC)
OUTPUT
LOGIC "0" LEVEL
+0.5 VDC MAX (10% VDD)
+0.5 VDC MAX (10% VDD)
LOGIC "1" LEVEL
LOAD††
+4.5 V MIN (90% VDD)
+4.5 V MIN (90% VDD)
1-10 TTL OR 15 pF CMOS
1-10 TTL OR 15 pF CMOS
HIGH OR OPEN
LOW
HIGH OR OPEN
LOW
CONTROL (PIN 1)
ENABLE/DISABLE
FUNCTION
ENABLE : HIGH
ENABLE : HIGH
OUTPUT (PIN 8 OR 5)
DISABLE (LOW) : HIGH IMPEDANCE DISABLE(LOW) : HIGH IMPEDANCE
† FREQUENCY STABILITY INCLUSIVE OF ROOM TOLERANCE ,
FREQUENCY STABILITY OVER TEMPERATURE, 10% POWER SUPPLY VARIATION,AGING, SHOCK,AND VIBRATION
†† +3.3 VOLT VERSION ISAVAILABLE. CONSULT RALTRON FOR SPECIFICATIONS
††† OUTPUT LOADSALSOAVAILABLEAT 15 pF, 30 pFAND 50 pF. CONSULT RALTRON FOR SPECIFICATIONS
OUTPUT WAVEFORM
ENVIRONMENTALAND TECHNICAL CONDITIONS
ENVIRONMENTAL
tf
tr
TEMPERATURE CYCLE
SHOCK
MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
MIL-STD-202, METHOD 213, TEST CONDITION C
MIL-STD-202, METHOD 204, TEST CONDITION A
VCC
"1" LEVEL
+4.5 VDC
+2.5 VDC
+0.5 VDC
VIBRATION
1/2 VCC
RESISTANCE TO
SOLDERING HEAT
MIL-STD-202, METHOD 210, TEST CONDITION B
"0" LEVEL
HUMIDITY
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
0 VDC
t
T
GROSS LEAK TEST
FINE LEAK TEST
TERMINAL STRENGTH
MARKING INK
MIL-STD-883, METHOD 1014, TEST CONDITION C
MIL-STD-883, METHOD 1014, TEST CONDITION A
MIL-STD-202, METHOD 211, TEST CONDITION A AND C
EPOXY, HEAT CURED.
MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B
SOLDERABILITY
MIL-STD-202, METHOD 208, 95% COVERAGE
MIL-STD-202, METHOD 215
SOLVENT RESISTANCE
PART NUMBERING SYSTEM
FREQUENCY
EXTENDED
SERIES
SYMMETRY
OPTIONS
FREQUENCY
IN MHz
STABILITY
TEMPERATURE
100
050
025
±100 PPM
-
-
-
-
TR TAPE AND REEL*
GW GULL WING
3.3 +3.3 V
CO15 (14 PIN DIP)
CO19 (8 PIN DIP)
±50 PPM
±25 PPM
EXT
T TIGHT SYMMETRY
* Available for Gull Wing only
EXAMPLE: CO15100-12.000-EXT, CO19050-45.000-T
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com