THROUGH HOLE CLOCK OSCILLATORS-HCMOS COMPATIBLE
SERIES CO6 AND CO12
FEATURES
STANDARD 8 AND 14 PIN DIPPACKAGE
TOLERANCEAND STABILITY TO ± 25 PPM
EXCELLENT CLOCK FOR 16 AND 32 BIT PROCESSORS
LOW COST
AVAILABLE IN 3.3 VOLT
SPECIFICATIONS
SERIES
CO6
CO12
PACKAGE
14 PIN DIP
8 PIN DIP
FREQUENCY RANGE
500.00 KHz TO 125.00 MHz
CO6100 : ±100 PPM
500.00 KHz TO 125.00 MHz
CO12100 : ±100 PPM
FREQUENCY STABILITY†
CO6050 : ±50 PPM
CO6025 : ±25 PPM
CO12050 : ±50 PPM
CO12025 : ±25 PPM
0° C TO +70° C STANDARD
-40° C TO 85° C EXTENDED
0° C TO +70° C STANDARD
-40° C TO 85° C EXTENDED
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
VOLTAGE††
-55° C TO +125° C
+5 VDC ±0.5 VDC
-55° C TO +125° C
+5 VDC ±0.5 VDC
500 KHz TO 19.999 MHz: 20 mA
500 KHz TO 19.999 MHz: 20 mA
INPUT
20 MHz TO 34.999 MHz: 30 mA
35 MHz TO 69.999 MHz: 40 mA
20 MHz TO 34.999 MHz: 30 mA
35 MHz TO 69.999 MHz: 40 mA
CURRENT (MAX)
70 MHz TO 125 MHz: 60 mA
70 MHz TO 125 MHz: 60 mA
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
SYMMETRY
UNDER 24 MHz : ±10 ns MAX
UNDER 24 MHz : ±10 ns MAX
RISE AND FALL TIME
(0.5 - 4.5 VDC)
24 MHz TO 70 MHz : ±6 ns MAX
70 MHz TO 125 MHz : ±3 ns MAX
24 MHz TO 70 MHz : ±6 ns MAX
70 MHz TO 125 MHz : ±3 ns MAX
OUTPUT
LOGIC "0" LEVEL
+0.5 V MAX. (10% VDD)
+0.5 V MAX. (10% VDD)
LOGIC "1" LEVEL
LOAD†††
+4.5 V MIN (90% VDD)
15 pF OR 10 LS TTL STANDARD
+4.5 V MIN (90% VDD)
15 pF OR 10 LS TTL STANDARD
† FREQUENCY STABILITYINCLUSIVE OF ROOM TOLERANCE , FREQUENCYSTABILITYOVER TEMPERATURE,
10% POWER SUPPLY VARIATION,AGING, SHOCK,AND VIBRATION
†† +3.3 VOLT VERSION IS AVAILABLE. CONSULTRALTRON FOR SPECIFICATIONS
††† OUTPUT LOADS ALSOAVAILABLEAT15 pF, 30 pF AND 50 pF. CONSULTRALTRON FOR SPECIFICATIONS
ENVIRONMENTALAND TECHNICAL CONDITIONS
OUTPUT WAVEFORMS
ENVIRONMENTAL
TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
tf
tr
SHOCK
MIL-STD-202, METHOD 213, TEST CONDITION C
MIL-STD-202, METHOD 204, TEST CONDITION A
VCC
VIBRATION
"1" LEVEL
+4.5 VDC
+2.5 VDC
RESISTANCE TO
SOLDERING HEAT
MIL-STD-202, METHOD 210, TEST CONDITION B
1/2 VCC
HUMIDITY
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
"0" LEVEL
+0.5 VDC
0 VDC
GROSS LEAK TEST
FINE LEAK TEST
TERMINAL STRENGTH
MARKING INK
MIL-STD-883, METHOD 1014, TEST CONDITION C
MIL-STD-883, METHOD 1014, TEST CONDITION A
MIL-STD-202, METHOD 211, TEST CONDITION A AND C
EPOXY, HEAT CURED.
t
T
MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B
SOLDERABILITY MIL-STD-202, METHOD 208, 95% COVERAGE
SOLVENT RESISTANCE MIL-STD-202, METHOD 2002, METHOD 215
PART NUMBERING SYSTEM
FREQUENCY
EXTENDED
SERIES
FREQUENCY
IN MHz
SYMMETRY
OPTIONS
ST A BIL ITY
TEMPERA TURE
100
±100 PPM
±50 PPM
±25 PPM
-
-
-
-
TR TA PE A ND R EEL *
GW GULL WING
3.3 +3.3 V
CO6
CO12
(14 PIN DIP)
(8 PIN DIP)
050
025
EXT
T TIGHT SY MMETRY
EXAMPLE: CO6100-10.000-EXT-T, CO12050-32.000-EXT-T-TR
* Available for Gull Wing only
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com