THROUGH HOLE CLOCK OSCILLATORS-HCMOS COMPATIBLE
SERIES CO6 AND CO12
FEATURES
STANDARD 8 AND 14 PIN DIP PACKAGE
TOLERANCE AND STABILITY TO 25 PPM
EXCELLENT CLOCK FOR 16 AND 32 BIT PROCESSORS
LOW COST
AVAILABLE IN 3.3 VOLT
SPECIFICATIONS
SERIES
CO6
14 PIN DIP
CO12
8 PIN DIP
PACKAGE
FREQUENCY RANGE
500.00 KHz TO 125.00 MHz
CO6100 : ±100 PPM
CO6050 : ±50 PPM
CO6025 : ±25 PPM
500.00 KHz TO 125.00 MHz
CO12100 : ±100 PPM
CO12050 : ±50 PPM
CO12025 : ±25 PPM
FREQUENCY STABILITY†
0° C TO +70° C STANDARD
-40° C TO 85° C EXTENDED
0° C TO +70° C STANDARD
-40° C TO 85° C EXTENDED
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
-55° C TO +125° C
+5 VDC ±0.5 VDC
-55° C TO +125° C
+5 VDC ±0.5 VDC
VOLTAGE††
500 KHz TO 19.999 MHz: 20 mA
20 MHz TO 34.999 MHz: 30 mA
35 MHz TO 69.999 MHz: 40 mA
70 MHz TO 125 MHz: 60 mA
500 KHz TO 19.999 MHz: 20 mA
20 MHz TO 34.999 MHz: 30 mA
35 MHz TO 69.999 MHz: 40 mA
70 MHz TO 125 MHz: 60 mA
INPUT
CURRENT (MAX)
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
SYMMETRY
UNDER 24 MHz : ±10 ns MAX
24 MHz TO 70 MHz : ±6 ns MAX
70 MHz TO 125 MHz : ±3 ns MAX
+0.5 V MAX. (10% VDD)
UNDER 24 MHz : ±10 ns MAX
24 MHz TO 70 MHz : ±6 ns MAX
70 MHz TO 125 MHz : ±3 ns MAX
+0.5 V MAX. (10% VDD)
RISE AND FALL TIME
(0.5 - 4.5 VDC)
OUTPUT
LOGIC "0" LEVEL
LOGIC "1" LEVEL
LOAD†††
+4.5 V MIN (90% VDD)
+4.5 V MIN (90% VDD)
15 pF OR 10 LS TTL STANDARD
15 pF OR 10 LS TTL STANDARD
†FREQUENCY STABILITY INCLUSIVE OF ROOM TOLERANCE , FREQUENCY STABILITY OVER TEMPERATURE,
10% POWER SUPPLY VARIATION, AGING, SHOCK, AND VIBRATION
†† +3.3 VOLT VERSION IS AVAILABLE. CONSULT RALTRON FOR SPECIFICATIONS
††† OUTPUT LOADS ALSO AVAILABLE AT 15 pF, 30 pF AND 50 pF. CONSULT RALTRON FOR SPECIFICATIONS
ENVIRONMENTAL AND TECHNICAL CONDITIONS
OUTPUT WAVEFORMS
ENVIRONMENTAL
TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
tf
tr
SHOCK
MIL-STD-202, METHOD 213, TEST CONDITION C
MIL-STD-202, METHOD 204, TEST CONDITION A
VCC
VIBRATION
"1" LEVEL
+4.5 VDC
+2.5 VDC
+0.5 VDC
RESISTANCE TO
SOLDERING HEAT
MIL-STD-202, METHOD 210, TEST CONDITION B
1/2 VCC
HUMIDITY
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
"0" LEVEL
0 VDC
GROSS LEAK TEST
FINE LEAK TEST
TERMINAL STRENGTH
MARKING INK
MIL-STD-883, METHOD 1014, TEST CONDITION C
MIL-STD-883, METHOD 1014, TEST CONDITION A
MIL-STD-202, METHOD 211, TEST CONDITION A AND C
EPOXY, HEAT CURED.
t
T
MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B
SOLDERABILITY MIL-STD-202, METHOD 208, 95% COVERAGE
SOLVENT RESISTANCE MIL-STD-202, METHOD 2002, METHOD 215
PART NUMBERING SYSTEM
FREQUENCY
STABILITY
EXTENDED
TEMPERATURE
SERIES
FREQUENCY
IN MHz
SYMMETRY
OPTIONS
-
-
-
-
100
050
025
±100 PPM
±50 PPM
±25 PPM
TR TAPE AND REEL
TIGHT SYMMETRY GW GULL WING
3.3V +3.3 V
CO6
CO12
(14 PIN DIP)
(8 PIN DIP)
EXT
T
EXAMPLE: CO6100-10.000-EXT-T, CO12050-32.000-EXT-T-TR
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com