0.25-6.0 GHz
High Dynamic Range Amplifier
February 2008 - Rev 12-Feb-08
CMM6004-AH
Features
Functional Block Diagram
0.25 to 6.0 GHz Frequency Range
+41 dBm Output IP3
1.7 dB Noise Figure
15 dB Gain
Pin 1
INPUT
OUTPUT
(BIAS)
+23 dBm P1dB
LGA Package
Single Power Supply
Single Input Matching
ALL OTHER PINS GROUNDED
Description
Absolute Maximum Ratings
The CMM6004-AH is a high dynamic range amplifier designed for
applications operating within the 0.25 to 6.0 GHz frequency
range. It is an ideal solution for numerous transmit and receive
functions in wireless local loop (WLL) and UNH applications
where high linearity is required.
Supply Voltage
+6.0 V
RF Input Power*
+20 dBm
-55ºC to 125ºC
150ºC
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
The amplifier has the flexibility of being optimized for a number
of wireless applications. It is an ideal solution when used as a
driver amplifier in applications including cellular and PCS
(personal communications services) operating from 0.8 to 2.2
GHz; MMDS (multichannel multipoint distribution systems)
operating from 2.2 to 2.7 GHz; WLAN (wireless LAN) operating at
2.4 GHz; WLL (wireless local loop) operating at 3.5 GHz; and
HiperLAN (high performance LAN) and U-NII (unlicensed national
information infrastructure) operating from 5.0 to 6.0 GHz.
-40ºC to +85ºC
50ºC/W
Operation of this device above any of these parameters may cause
permanent damage.
*Operation with more than 10 dBm of RF input power may cause 2 dB
degradation in OIP3 performance.
Applications
Wireless Local Loop Transmit and Receive
UNH Transmit and Receive
Dual Band 802.11 WLAN
WiMAX
The CMM6004-AH is packaged in a low-cost, space efficient,
Land Grid Array (LGA) package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested. With single input matching the part
simplifies design by keeping board space and cost to a
minimum.
LAN
Electrical Characteristics (T=25ºC)
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain
0.25
13.5
6.0 GHz
dB
Externally matched
Externally matched
15
-10
41
Input Return Loss
Output IP3
dB
38
dBm
dB
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
Notes:
1.7
23.0
dBm
120 150 180 mA
5.0
V
1.T = 25ºC,Vdd = 5V, Frequency = 2 GHz, 50 Ohm system.
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Page 1 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.