5秒后页面跳转
CMLV12S15-100 PDF预览

CMLV12S15-100

更新时间: 2024-09-17 00:47:31
品牌 Logo 应用领域
WALL /
页数 文件大小 规格书
3页 333K
描述
Encapsulated for Added Ruggedness

CMLV12S15-100 数据手册

 浏览型号CMLV12S15-100的Datasheet PDF文件第2页浏览型号CMLV12S15-100的Datasheet PDF文件第3页 
CMLV Series  
Half-Brick  
50-150 Watt, Single Output  
Chassis Mount DC/DC Converter  
Rev D  
FEATURES  
APPLICATIONS  
Soft Start  
For use in 12V and 24V Battery Applications  
For use in Intermediate and Distributed  
Bus Architectures (IBA)  
100% Burn In  
High Reliability  
Remote ON/OFF  
Up to 89% Efficient  
Cost Efficient Solution  
Fast Transient Response  
Fixed Switching Frequency  
Telecommunications Equipment  
Network (LANs/WANs) Equipment  
Next Generation Low Voltage, High  
Current Microprocessors and ICs  
Encapsulated for Added Ruggedness  
Short Circuit and Over Current Protected  
Remote Sense Compensation to 10% Vout  
DESCRIPTION  
The CMLV series consists of high density, low input voltage, isolated converters on a chassis mount with a wide input voltage  
range. Low input voltage converters are uncommon in the industry and the CMLV series offers the flexibility of operation with  
both 12V and 24V busses. These state-of-the-art converters’ features include fast transient response, short circuit protection,  
over current protection, soft start, and many other features that are required for today’s demanding applications.  
SPECIFICATIONS: CMLV Series  
All specifications apply @ 25°C ambient unless otherwise noted  
INPUT SPECIFICATIONS  
PROTECTION SPECIFICATIONS  
Input Voltage Range .....................................................10-36VDC  
UVLO Turn On at ...................................................... 9.6VDC max  
UVLO Turn off at....................................................... 9.5VDC max  
Input Filter..............................................See Technical Datasheet  
Current Limit ...................................................................110-140%  
Short Circuit Protection................................................. Continuous  
GENERAL SPECIFICATIONS  
Efficiency ............................................................................To 89%  
Switching Frequency ...................................................400KHz typ.  
Remote ON/OFF ........................... Logic Enable referenced to -Vin,  
No suffix........................................... Open/High=ON, Low=OFF  
“R” suffix .......................................... Open/High=OFF, Low=ON  
Isolation Voltage  
Input to Output..........................................................1500VDC  
Input to Case ..............................................................500VDC  
Output to Case............................................................500VDC  
Input Reflected Ripple current..................................... 225mA typ.  
Input Surge Voltage ................................. 50VDC max for 100ms  
Isolation Resistance.......................................................10Mmin.  
OUTPUT SPECIFICATIONS  
ENVIRONMENTAL SPECIFICATIONS  
Output Voltage ................................................................see table  
Voltage Accuracy ................................................................... ±1%  
Output Adjustability .............................................................. ±10%  
Output Current ................................................................see table  
Output Power ..................................................................see table  
Line Regulation (LL to HL at FL) ......................................... ±0.2%  
Load Regulation (20% to 100% load).................................. ±0.2%  
Ripple/Noise (20 MHz BW) ................................................... 1.5%  
Remote Sense Compensation ............................................... 10%  
Transient Response (50% load step)..................................250ms  
Operating Temperature (case).............................. -40°C ~ +100°C  
Storage Temperature.............................................-50°C ~ +125°C  
Humidity..............................................................................To 95%  
Temperature Coefficient ................................................ ±0.2% / °C  
MTBF.................................................................... 2,563,116 hours  
PHYSICAL SPECIFICATIONS  
Weight ...................................................................... 7.52oz (213g)  
Dimensions (L x W x H) ...........................5.70 x 3.40 x 1.34 inches  
144.8 x 86.4 x 34 mm  
Case Material................................................. thick, aluminum alloy  
Due to advances in technology, specifications subject to change without notice  
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833  
603-778-2300 www.wallindustries.com Fax 603-778-9797  
02/24/2011  
Page 1 of 3  

与CMLV12S15-100相关器件

型号 品牌 获取价格 描述 数据表
CMLV12S15-125 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S15-150 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S15-200 WALL

获取价格

The LV200 is a high density, low input voltage, isolated converter with a 4:1 ultra wide i
CMLV12S15-50 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S18-150 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S20-100 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S24-150 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S24-200 WALL

获取价格

The LV200 is a high density, low input voltage, isolated converter with a 4:1 ultra wide i
CMLV12S26-150 WALL

获取价格

Encapsulated for Added Ruggedness
CMLV12S28-150 WALL

获取价格

Encapsulated for Added Ruggedness