Catalog 1308242
Issued 3-03
P&B
CL-CUseries
Com pact Tim e Delay Relay
• Delay on operate timing mode
• Fixed, knob or resistor adjustable types
• 10A output relay with DPDT contacts
• Variety of mounting options
• Various models time from 0.1 to 120 sec.
• No timing cycle interrupt transfer (CL only)
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Contact Data @ 25°C
Tim ing Mode
Arrangem ents: 2 Form C (DPDT).
Material: Silver-cadmium oxide alloy.
Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC;
Delay on operate – Delay period begins when input voltage is applied. At
the end of the delay period, the relay will operate and will not release until
input voltage is removed. Reset occurs when input voltage is reapplied.
1/3 HP @ 120VAC.
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations, min., at rated load.
INPUT
VOLTAGE
ON
OFF
N.O. RELAY ON
CONTACTS OFF
TIME
Initial Dielectric Strength
➛
➛
Betw een Open Contacts: 500V rms, 60 Hz.
Betw een All Other Conductors: 500V rms, 60 Hz.
CL Tim ing Specifications
Input Data @ 25°C
Tim ing Ranges: From 0.1 to 1.0 sec. through 1.2 to 120 sec.
Tim ing Adjustm ent: Fixed, external resistor and knob adjustable.
Tolerance (for AC units add ±1/2 cycle 60 Hz.):
Voltage: 24 & 120VAC and 12 & 24VDC.
Pow er Requirem ent: AC Types: Typically less than 3 VA.
DC Types: Typically less than 3 W.
Transient Protection: Yes.
Reverse Voltage Protection: Yes.
Knob Adj. Types:–0, +20% of max. specified at high end of timing
range; min. specified, or less, at low end.
Fixed Types:
±5% .
Res. Adj. Types: ±10% at high end of timing range; min. specified, or
less, at low end.
Repeatability (for AC units add ±1 cycle 60 Hz.): ±3% .
Release Tim e: 100 ms, typ.; 150 ms, max.
Recycle Tim e: 100 ms, typ.; 150 ms, max.
Input Voltages & Lim its @ 25°C
Voltage
Type
Nom inal
Voltage
Minim um
Voltage
Maxim um
Voltage
AC
DC
24
120
20
105
28
130
12
24
11
20
13
32
CU Tim ing Specifications
Tim ing Ranges: From 1.0 to 10 sec. through 1.0 to 120 sec.
Tim ing Adjustm ent: Fixed, external resistor and knob adjustable.
Tolerance (for AC units add ±1/2 cycle 60 Hz.):
Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage).
AC models will operate on 50 or 60 Hz.
Knob Adj. Types:–0, +20% of max. specified at high end of timing
range; min. specified, or less, at low end.
Environm ental Data
Tem perature Range: Storage: -55°C to +85°C.
Operating: -10°C to +55°C.
Fixed Types:
±5% .
Res. Adj. Types: ±10% at high end of timing range; min. specified, or
less, at low end.
Mechanical Data
Term ination: 0.187 in. (4.75mm) quick-connect.
Enclosure: Yellow plastic case (see outline drawings for various options).
Knob adjustable types have dial scale for reference only.
Sockets: Solder, printed circuit and screw terminal sockets available.
Weight: 3.5 oz. (99g) approximately.
Repeatability (for AC units add ±1 cycle 60 Hz.): ±3% .
Release Tim e: 150 ms, typ.; 225 ms, max.
Recycle Tim e: 150 ms, typ.; 225 ms, max.
Note: On CU types the switching contact may momentarily transfer if the timing interval is
interrupted. CL types have no timing cycle interrupt transfer.
CL Ordering Inform ation – Authorized distributors are m ore likely to stock boldface item s listed below .
Voltage
24VAC
24VAC
Tim e
Adjustm ent
Knob
Wiring Dia. Part Num ber
Voltage
12VDC
12VDC
12VDC
24VDC
Tim e
Adjustm ent
Knob
Wiring Dia. Part Num ber
0.1 to 10 Sec.
0.1 to 10 Sec.
1
2
CLB-51-30010
0.1 to 10 Sec.
10 Sec.
1
1
2
1
CLD-51-20010
CLC-41-20010
CLH-41-20120
CLC-41-30005
Resistor
CLF-42-30010
Fixed
0.1 to 10 Sec.
0.3 to 30 Sec.
1.2 to 120 Sec.
CLB-51-70010
CLB-51-70030
CLB-51-70120
1.2 to 120 Sec.
5 Sec.
Resistor
Fixed
120VAC
120VAC
Knob
Fixed
1
1
0.1 to 10 Sec.
0.3 to 30 Sec.
0.1 to 10 Sec.
CLH-41-30010
CLH-41-30030
CLH-45-30010
3 Sec.
30 Sec.
CLA-41-70003
CLA-41-70030
24VDC
Resistor
2
0.1 to 10 Sec.
0.1 to 10 Sec.
1.2 to 120 Sec.
CLF-41-70010
CLF-42-70010
CLF-41-70120
41 style models (e.g. CLA-41-70010) have plain case.
42 style models (e.g. CLF-42-70010) have bracket mount case.
45 style models (e.g. CLH-45-30010) have bracket mount case with test button.
51 style models (e.g. CLB-51-30010) have plain case with knob.
120VAC
Resistor
2
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1231
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
