Class 2 UL5085-3 Transformer
60VA - 75VA, Non-Inherently Energy Limited
Series: CL - Lead Wires & Quick-Connects
Power Rating 60VA to 75VA
Secondary Fusing Required (Provided by Factory),
Frequency 50/60Hz
Insulation Class B (155°C)
Agency Approvals:
UL/cUL 5085-3 Class 2 Recognized (File E49606)
Insulation File No. E95662
Class 2
* 60 & 75VA transformers must have overcurrent protectors in series with the secondary winding.
* Multi voltage combinations are available - consult factory.
Lead Wires
Type HX Foot Mount - Steel bracket welded to the
bottom of the laminations for easy mounting
Type GX Panel Mount - 0.218” (5.54 mm) diameter
holes in each corner to allow direct mounting to a panel.
Quick-Connects
Type BB Foot Mount, Pri & Sec on Same Side - Quick connect terminals
with line and load terminations on the same side of transformer.
Type AE Laydown, Pri & Sec on Top Side - Quick connect terminals
with line and load terminations on the top of transformer.
Type AB Foot Mount, Pri & Sec on Opposite Side - Quick connect
terminals with line and load terminations on opposite sides of transformer
Terminals:
Lead Wires: All leads are 18 AWG stranded 2/64” (0.794 mm)
insulation thickness. Standard parts have 12” (305 mm)
total length with 1/2” (12.7 mm) strip.
Standard male quick connects - .250” x .032” (6.35 x .81mm).
Other available quick connects - .187” x .032” (4.75 x .81 mm)
Type HX - Foot Mount, Internally Fused
Type HX - Foot Mount, Integral Circuit Breaker
Type GX - Panel Mount
Type BB - Foot Mount, Pri & Sec on Same Side
Type AE - Laydown, Pri & Sec on Top side, Internally Fused
Type AE - Laydown Termination, Pri & Sec on Top Side,
Integral Circuit Breaker
Dimensions (Inches)
A
B
Internally Fused
w/ Integral Circuit Breaker
Standard Part
2.500
2.500
1.000
3.300
1.000
1.000
Any application, Any requirement, Contact us for our Custom Designs
Sales Office:
300 W Factory Road, Addison IL 60101 • Phone: (630) 628-9999 • Fax: (630) 628-9922 • www.wabashtransformer.com
20