FEATURES / BENEFITS
p
p
Ultra slim design, less than 1/2” (13mm) high
70% lumen maintenance @ 50,000+ hr life @ 25ºC
ambient temperature
CL2 SERIES
p
p
Low energy use, no IR or UV emissions
Modular “quick connect” system for easy installation
p Designed for even LED spacing over linear runs, no
hotspots or dark spots between fixtures
p Cool to touch, suitable for direct mounting on flammable
surfaces
p Onboard constant current driver with low voltage input
p ETL listed to UL standards for dry locations
Frosted Lens Version
p Utilizes the latest high efficiency LED technology
APPLICATIONS
The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra slim
profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true
innovation in lighting, delivered in a package which blends seamlessly into it’s surroundings. Sample applications include, but not
limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display cases, task lighting.
OPERATING CONDITIONS
MATERIALS/FINISH
p
p
Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF)
Input voltage 24VDC. Use only class 2 power supplies
p
p
p
p
p
Anodized aluminum module base with polycarbonate lens
Plug & play connector system
p
Power consumption 5.3W per module
Does not include power supply losses
Onboard constant current driver
4 high output 1W LEDs per module
p
Max # of modules connected per run = 20. Up to 16
modules can be operated on a 100W power supply
20AWG, PTFE cable - UL rated E213967, 300V, 80ºC
ORDERING INFORMATION
Catalog
Number
(A)
Min Luminous Typical Luminous
Typical
CCT
Lens
(B)
LED Color
Cool White
Flux per Module Flux per Module
CRI
(lumens)
(lumens)
C
N
W
Z
5000K
4100K
3000K
3000K
288
242
204
171
342
288
242
204
75
75
75
92
C = Clear
Neutral White
Warm White
F = Frosted
High CRI Warm White
Note: Special colors available, consult factory.
LED data is LED manufacturers test data at 25ºC Tj. Light output at max acceptable ambient temp will be approximately
15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by
additonal 8-10%, and frosted lens by additional 30%.
Connectors (sold separately)
CL2-E2E = End to end module connector
CL2-START = 3m / 9’ 10” start cable (supplies power to first module)
CL2-END = End plug
CL2-FLEX = 63mm / 2.5” flexible end to end connector
CL2-EXTEND = 952mm / 37.5” flexible end to end connector
Dialight Corporation
Dialight Lumidrives
PRIVATE LABEL
OEM PROGRAM
1501 Route 34 South • Farmingdale, NJ 07727 USA
York House • Weatherby Road • Long Marston, York, YO26 7NH
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com
MDEXLUMCL2_A