3.3-3.6 GHz InGaP HBT
8W Linear Power Amplifier
February 2008 - Rev 29-Feb-08
CHV2721-QJ
Features
P1dB, 8W
Power Gain, 11 dB
Efficiency, 20% @ 1W
Positive Voltage Supply, +5V to +12V
Integrated Active Bias Circuit
Control Voltage Allows Different Current Settings
Input Fully Matched Internally
Output Pre-Matched Internally
Thermally Efficient for Higher MTTF
RoHS Compliant 6X6mm QFN
Ideal for WiMAX Applications (802.16)
General Description
Absolute Maximum Ratings
The CHV2721-QJ is a high linearity single stage class AB
Heterojunction Bipolar Transistor (HBT) power amplifier
capable of 11 dB of gain, 8 Watt of power at 1 dB
Voltage Supply (Vcc)
Current (Icc)
4.5 (min) / 12 V (max)
2000 mA
compression and is housed in a 6X6mm QFN package. The
CHV2721-QJ provides less than 2.5% EVM at 31dBm output
power with 802.16 OFDM signal and peak to average
power ratio of 9 dB.The input of the device is fully matched
and the output is internally pre matched to 6 ohm
facilitating a simplified output matching approach.This
product operates off a single supply voltage between 5V
and 12V and includes an internal bias circuitry to enable
exact setting of quiescent current using an external control
voltage. The device is ideal as a final or driver stage for
WiMAX equipment in the 3.3 -3.6 GHz bands.
Dissipated Power (Pdiss)
Input Power (Pin)
Storage Temperature (Tstg)
Channel Temperature (Tch)
Thermal Resistance (Rth)
18W
22 dBm
-60 to +150 ºC
175 ºC
5 ºC/W
Operating Backside Temperature (Tb) -40 ºC to (see note 1)
Operation outside any of these limits can cause permanent damage.
(1) Caclulate maximum operating temperature Tmax using the
following formula:Tmax=175-(Pdiss [W] x 5) [C].
Electrical Characteristics (AmbientTemperatureT=25 oC,Vcc=12V)1
Description
Parameter
Units
GHz
mA
dB
Min.
Typ.
3.4
160
11
Max.
Operating Frequency
f
3.3
-
3.6
-
(2)
Quiescent Current
Icq
Power Gain @ Pout = 31dBm
Efficiency @ 31dBm
Gps
Eff
-
-
%
-
25
-
(3)
Output Power @ EVM = 2.5%
Pout
ACPR
P1dB
OIP3
S11
dBm
dBc
dBm
dBm
dB
-
31
-
(4)
Adjacent Channel Power Ratio @Pout = 31dBm
Power @ 1dB Compression Point
-
-40
39
-
-
-
(5)
Output Third order intercept Point @ 31dBm/tone
Input Reflection Coefficient
Control Voltage
-
51
-
-
-12
5
-
Vctrl
NF
V
-
-
Noise Figure
dB
-
9
-
(1) Data measrued in a Mimix matched connectorized fixture.
(2) Quiescent current depends on Vcc
(3) Using an 802.16d OFDM signal format with PAR = 9dB
(4) Using 3 GPP WCDMA signal, PAR = 9.17dB
(5) 100KHz spacing
Page 1 of 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.