CENB1030
Universal 30 Watt Series
ITE Switch-Mode Power Supply
3 Year Warranty
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•Certified to UL/EN60950-1, 2nd Edition
•5Vto 48V outputs, up to 32W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption <0.3W
•Limited Power Source
•Desktop & Wall Plug Styles
RoHS
LPS
Specifications
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
MTBF
>100,000 hours calculated
18 ms min. @ 115VAC, 60 msec @ 230VAC
2 seconds, max.
AC Input
100-240VAC, -/-10%, 47-63 Hz, 1∅
Input Current
Inrush Current
Input Fuse
Efficiency
100VAC: 0.9A Hold-up Time
60A peak, 264Vac, cold start
Turn-on Time
Topology
3.15A Internal Primary Current Fuse is provided
Switching – Fixed Frequency Flyback
Hiccup Mode
Meets EISA2007, CEC Efficiency Level V,
Overload Protection
and EU(EC) No. 278/2009 Phase II requirements
Output Voltage
Output Power
See chart
See chart
Short Circuit Protection
EMC
Hiccup Mode
See chart below
Ripple and Noise
1% pk-pk max., 20MHz BW
Safety Standards
Dielectric Withstand
EN/IEC/CSA/UL60950-1, 2nd Edition, LPS
Line & Load Voltage Regulation
Line: +/- 1%, Load: +/-5%
Input-Output: 4,242VDC, Input-GND: 1,500 Vac,
Output-GND: 500Vdc
Transient Response
Minimum Load
500μs max., 50% load step, typical
Not required
Operating Temperature
Storage Temperature
Relative Humidity
Altitude
0° to 40°C, no derating
-40° to +85°C
5% to 95%, non-condensing
0 to 10,000 ft
Case Material:
Black 94V0 Polycarbonate
Case Dimensions:
95 x 54 x 31mm. See outline drawing
Weight = 200g
Output Connector:
2.5mm barrel type (Ault #3) connector, Output Cable:
5V – 9V models: #18AWG (SPT-1), 1,500mm, 2 conductor
center contact (+). Other options available
12V – 48V models: #18AWG (UL1185), 1,500mm, 2 conductor
EMC Specifications
Conducted Emissions
Radiated Emissions
EN55022 Class B, FCC Part 15, Class B.
EN55022 Class B, FCC Part 15, Class B.
EN61000-3-2, Class A
Line Frequency Harmonics
Voltage Fluctuations/Flicker
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-3-3
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
EN61000-4-4, 2kV/5kHz.
Line Surge Immunity
Conducted RF Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
EN61000-4-8, 3A/m
EN61000-4-11, Criteria B
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com