Type CD16 & CDV16 Snubber and RF Application, Mica Capacitors
Higher dV/dt Capability and Flatter Insertion Loss
Ideal for snubber and RF applications, CDV16 mica capacitors now handle
dV/dts up to 275,000 V/μs and they assure controlled, resonance-free
performance through 1 GHz. CDV16/CD16 mica capacitors excel in both
snubber applications and high-frequency applications like RF and CATV. Type
CDV16’s high pulse current capability make them ideal for pulse and snubber
applications. CDV16 capacitors withstand an unlimited number of pulses
with a dV/dt of 275,000 V/μs. This is a 20% increase in dV/dt capability when
compared to our CDV19 mica capacitors and CDV16’s are smaller too. CDV16
capacitors handle higher peak currents — up to 825 amps. They also handle
high continuous RMS current at 5 MHz and up to 30 MHz. For example, a 3000
pF CDV16 capacitor handles 6.2 A rms continuously at 13.56 MHz and it is 1/4
the cost of a comparable porcelain ceramic capacitor. In addition to being
great for snubbers, CDV16 is a fit for your RF applications. Their compact size
and closer lead spacing improves insertion loss performance — insertion loss
data is flat within 0.2 dꢀ, typically to beyond a gigahertz.
Highlights
• Handles up to 9.0 amps rms continuous current
Specifications
Capacitance Range:
Capacitance Tolerance:
• Very low ESR from 10 to 100 MHz
100 pF to 7,500 pF
5% (J) standard;
1% (F) and 2%
(G) available
500 Vdc & 1,000 Vdc
–55 °C to +150 °C
• Low, notch-free impedance to 1GHz
• Stable: no capacitance change with (V), (t), and (f)
• Very high Q at UHF/VHF frequencies
• Tape and reeling available
• dV/dt capability up to 275,000 V/μs
• 1,500 amps peak current capability
Voltage:
Temperature Range:
Part Numbering System
CD16 / CDV16
F
D / F
101
J
O
3
F
Series
Characteristic
Code
Voltage
(Vdc)
Capacitance Capacitance
Temperature
Range
Vibration
Grade
Blank =
Not Specified
F= RoHS
(pF)
Tolerance
Compliant
D = 500 Vdc
F = 1000 Vdc
101 = 100 pF
102 = 1000 pF
O = –55 ºC to +125 ºC
P = –55 ºC to +150 ºC
Vibration Grade
Vibration
Characteristics
Temp. Coeff.
No.
MIL-STD-202 Condition (Hz)
Capacitance
Standard Cap.
Code
3
Method 204
Condition D
10 to 2,000
ppm/ ºC
Drift
Range
F
0 to +70
(0.05% +0.1 pF)
91 pF and up
Standard vibration grade is 3
Capacitance Tolerance
Tol.
Code
Tolerance
1 %
F
G
J
2 %
5 %
Standard tolerance is 5%
For RoHS compliant add the letter F at the end of the part number.
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com