CCM04 MKII
The CCM04 without card guidance is
used where space is at a premium and
the card guidance can be built around
the connector (rather than provided by
the connector itself).
Construction
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Moldings
The CCM04 low profile without card
guidance is dedicated to applications
where the overall height of the
connector is paramount. A range of low
profile CCM04 connectors are available
with 1.25 mm thick moldings.
Mechanical Data
Number of Contacts
Mechanical life
Contact force
Card detection switch
actuation force
6, 8
50,000 cycles min
0.25 N min / 0.5 N max
0.8 N max for actuation (end travel switch
actuates when card is 0,9 mm from
card stop) 1.8 N max for complete
depression
Frequency 10 to 500 Hz. Acceleration
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
The wide choice of contact configura-
tions and molding heights suit a broad
range of applications.
Vibration
2
50m/s
Features
2
Shock
Peak value 500 m/s – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• Available in two molding heights 1,25
mm and 2,75 mm.
• The integrated card detection switch
(optional) is sealed against dust and grit.
Contact Electrical Data
Insulation resistance
Resistance
Current rating
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that
of standard gold plating.
Dielectric strength
• The height of the contact above the
insulator is 0,75 mm, allowing a wider
tolerance for the card entry slot.
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open (closes on card insertion)
100mΩ max
250 Vrms min
1 mA min/ 10 mA max
0.2 VA
• The contact area is spooned to
reduce the risk of accidental (or
deliberate) damage and to optimize
the electrical connection with the card.
Maximum power
Environmental Data
• The tip of the contact is protected by
the molding so that it cannot catch on
the card as the card is being inserted.
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
• The contact design ensures a
consistent and reliable contact force
over the life of the connector.
Damp heat
Salt mist
Card detection switch
Sealed IP 54 For CCM04 1889
Sealed against dust for other versions
• Robustly formed printed circuit tails
are well protected by the insulator
body.
Ordering Code
Part Number
Number of Contacts
Card Presence
Switch
Quantity per Reel
• The moldings are made from high
temperature thermoplastic suited for
infrared and convection soldering
processes.
CCM04-1801
CCM04-1814
CCM04-1889
CCM04-1316
CCM04-1317
6
8
8
8
8
No
No
Yes
Yes
Yes
1800
1300
1000
700
• With tape and reel packaging as
standard, the connectors are designed
to be automatically picked & placed.
700
Packaging
5 reels per box.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
29