CC6-
Vishay Electro-Films
www.vishay.com
Thin Film 0304 Size Resistor on Alumina
FEATURES
• Wire bondable
• Chip size: 0.030" x 0.045"
• Case: 0304
• Resistance range: 20 to 59 k
• Alumina substrate
Available
Available
• Low stray capacitance: < 0.2 pF
• Resistor material: Nichrome
• Resistor passivation coat optional
• Tolerances to 0.05 %
Available
Available
Product may not be to scale
• Solder pad optional
The CC6- series single-value resistor chips offer a small
size, low shunt capacitance and solder pad option.
The CC6- nichrome resistors material offers excellent
stability.
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
Note
This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
*
The CC6- resistors are manufactured using Vishay
Electro-Films (EFI) sophisticated thin film equipment and
manufacturing technology. The CC6- resistors are 100 %
electrically tested and visually inspected to MIL-STD-883,
method 2032 class H or K.
APPLICATIONS
Vishay EFI CC6- chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping.
Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
Recommended for hermetic applications where die is not
exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
UNIT
%
Total Resistance Range
Standard Tolerances
TCR
20 to 59K
0.05, 0.1
10, 25, 50, 100
ppm/°C
Tightest Standard Tolerance Available
0.05 %
0.1 %
10 ꢀꢀpm/°
25 ꢀꢀpm/°
50 ꢀꢀpm/°
100 ꢀꢀpm/°
20 Ω
75 Ω
30 kΩ
59 kΩ
100 Ω
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
VALUE
UNIT
Noise, MIL-STD-202, Method 308
- 20 typ.
dB
Moisture Resistance, MIL-STD-202, Method 106 - Hermetic
Applications
0.2 max. R/R
%
Stability, 1000 h, + 125 °C, 65 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
0.1 max. R/R
- 55 to + 125
0.25 max. R/R
0.1 max. R/R
400
%
°C
%
%
V
Insulation Resistance
1012 min.
Operating Voltage
100 max.
V
DC Power Rating at + 125 °C (Derated to zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
0.065 max.
0.25 max. R/R
W
%
Revision: 27-May-13
Document Number: 61006
1
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000