CALIFORNIA MICRO DEVICES
NDC
ISOLATED RESISTOR NETWORK
California Micro Devices resistor arrays are the hybrid equivalent to the isolated resistor networks available in surface
mount packages. The resistors are spaced on ten mil centers resulting in reduced real estate. These chips are
manufactured using advanced thin film processing techniques and are 100% electrically tested and visually inspected.
E LE C TR IC A L S P E C IF IC A TIO N S
Param eter
Test Condition
± 100ppm/°C
TCR
-55°C to + 125°
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Min
Operating Voltage
Power Rating (per resistor)
Thermal Shock
-55°C to + 125°
5 0 Vd c
@ 70°C (Derate linearly to zero @ 150°C)
Method 107 MIL-STD-202F
100 Hrs @ 150°C Ambient
Method 106 MIL-STD-202F
50mw
± 0.25%@∆R
± 0.25%∆R
± 0.5%∆R
High Temperature Exposure
Moisture Resistance
Life
Method 108 MIL-STD-202F (125°C/1000hr) ± 0.5%∆R
Method 308 MIL-STD-202F
-35 dB
-30 dB
0.25%
Noise
≥250kΩ
MIL-R-83401
@25°C
Short Time Overload
Insulation Resistance
1 X 1012
Ω
90
VA LU E S
8 resistors from 100Ω to 346Ω
R1
R2 R3 R4
R5 R6
R7 R8
60
M E C H A N IC A L S P E C IF IC A TIO N S
Substrate
Silicon 10± 2 mils thick
Isolation Layer
Backing
Metalization
SiO2 10,000Å thick, min
Lapped (gold optional)
Aluminum 10,000Å thick, min
(15,000Å gold optional)
Silicon nitride
Formats
Passivation
Die Size: 90±3 x 60±3 mils
Bonding Pads: 5x7 mils typical
P A C K A G IN G
Two inch square trays of 196 chips maximum.
N O TE S
1. Resistor pattern may vary from one value to another.
P A R T N U M B E R D E S IG N A TIO N
N
CC
Series Value
First 3 digits
5003
F
A
TCR
G
W
Backing
W = Gold
P
Tolerance
Bond Pads
Ratio Tolerance
No Letter= ± 1%
P = ± 0.5%
D = ± 0.5% No Letter = ± 100ppm G = Gold
are
F = ± 1%
G = ± 2%
J = ± 5%
K= ± 10%
M = ± 20%
A = ± 50%
B = ± 25%
No Letter= Aluminum L = Lapped
No Letter= Either
significant
value. Last
digit
represents
number of
zeroes. R
indicates
decimal point.
C0820400
© 2000 California Micro Devices Corp. All rights reserved.
4/00
215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Fax: (408) 263-7846
www.calmicro.com
1